17.4.3 ISDN
TIP: IBM System z: ISDN
The configuration of this type of hardware is not supported on IBM System z
platforms.
Use this module to configure one or several ISDN cards for your system. If YaST did
not detect your ISDN card, click on Add in the ISDN Devices tab and manually select
your card. Multiple interfaces are possible, but several ISPs can be configured for one
interface. In the subsequent dialogs, set the ISDN options necessary for the proper
functioning of the card.
Figure 17.5 ISDN Configuration
In the next dialog, shown in
protocol to use. The default is Euro-ISDN (EDSS1), but for older or larger exchanges,
select 1TR6. If you are in the US, select NI1. Select your country in the relevant field.
The corresponding country code then appears in the field next to it. Finally, provide
Figure 17.5, "ISDN Configuration"
(page 231), select the
Basic Networking
231