Midi Echo; Midi Program Change; Clock Source - Alesis HR-16 Instruction Manual

M I D I E C H O
The MlDl EcHo function is used lo echo any MrDr information lhat
is received at
rh€ MlDl input to th€ MlDl output. The displiy looks lik€ this:
The +/- arrow buttons are used to turn rhis function on or off. The defaurt
is oN.
The HB-l6 will not echo system exclusiv€ data.
MIDI PROGRAM CHANGE
Tho MlDl PROGRAM CHANGE function is used to allow MlDl program change
commands,to- select patt€rn numbers. MlDl programs oo throuih d9 wiil sele-ct
patterns 00-99, and MlDl
.programs lOO-127 till select pall;ns OO through
27. The display looks like this:
TOMIDIOTJT:
05
PATTSELECT:QfP
& INTERNAL
ONLY
SYNC IN
The +/- arrow buttons ar€ used ro turn this function on or off. The default is oFF.
When ON, incoming. MlDl program change commands will select paiterns.
Program changes will be ignored while a patGrn or song is playing.
CLOCK SOURCE
The clock source function is used to s€lect what clock will drive rhe HR-16. Th6
display will show one ol the three following choices:
By using lhe keypad or +/- arrow buttons, one of the
b€ selecred. The defaull sotting is MlDl & INTERNAL
being INTERNAL oNLY (2), and TAPE SYNC tN (3).
three clocking sources can
(1), with the other choices
Alesis HR-16 Instrucdons
Page 20