Page 1
COPIES OF THIS DOCUMENT The information in this document contains privileged and confidential information. It is intended only for the use of those authorized by Alesis. If you are not the authorized, intended recipient, you are hereby notified that any review, dissemination, distribution or duplication of this document is strictly prohibited.
Page 2
Your purchase of the Manual shall be for your own ultimate use and shall not be for purposes of resale or other transfer. As the owner of the copyright to the Manual, Alesis does not give you the right to copy the Manual, and you agree not to copy the Manual without the written authorization of Alesis. Alesis has no obligation to provide to you any correction of, or supplement to, the Manual, or any new or superseding version thereof.
Page 3
ALL REPAIRS DONE BY ANY ENTITY OTHER THAN AN AUTHORIZED ALESIS SERVICE CENTER SHALL BE SOLELY THE RESPONSIBILITY OF THAT ENTITY, AND ALESIS SHALL HAVE NO LIABILITY TO THAT ENTITY OR TO ANY OTHER PARTY FOR ANY REPAIRS BY THAT ENTITY.
The product is exposed to water or excessive moisture, c. The AC power supply plug or cord is damaged, d. The product shows an inappropriate change in performance or does not operate normally, or e. The enclosure of the product has been damaged. Confidential Alesis Service Manual 8-31-0137-A...
Page 6
MAIN PCB REV F Confidential Alesis Service Manual 8-31-0137-A...
Page 23
UB0MNF - Main PCB Rev F Last Revised: 3/17/2006 RevChange Document Suggested Performed SCH PCB CAM DATE DATE Description of change: Reason for change: TOP LEVEL CHANGES 3/13/2006 3/17/2006 Change all text from Rev E to F 3/13/2006 update all Part Types 3/13/2006 Review/Integrate all outstanding ECNs Note: ***A new solderpaste stencil IS NOT required***...
Page 24
MAIN PCB REV E Confidential Alesis Service Manual 8-31-0137-A...
Page 41
UB0MNE - Main PCB Rev E Last Revised: 3/13/2006 RevChange Document Suggested Performed SCH PCB CAM DATE DATE Description of change: Reason for change: TOP LEVEL CHANGES 12/2/2005 3/13/2006 Change all text from Rev D to E 12/2/2005 3/13/2006 update all Part Types 12/2/2005 Review/Integrate all outstanding ECNs Note: ***A new solderpaste stencil IS NOT required***...
Page 42
MAIN PCB REV D Confidential Alesis Service Manual 8-31-0137-A...
Page 59
UB0MND - Main PCB Rev D Last Revised: RevChange Document 12/1/2005 Suggested Performed SCH PCB CAM DATE DATE Description of change: Reason for change: TOP LEVEL CHANGES 10/26/2005 Change all text from Rev C to # 10/26/2005 update all Part Types 10/26/2005 Review/Integrate all outstanding ECNs 11/16/2005...
Page 60
MAIN PCB REV C Confidential Alesis Service Manual 8-31-0137-A...
Page 77
UB0MNC - Main PCB Rev C Last Revised: 10/26/2005 RevChange Document Suggested Performed SCH PCB CAM DATE DATE Description of change: Reason for change: TOP LEVEL CHANGES 10/12/2005 10/26/2005 Change all text from Rev B to C 10/12/2005 10/26/2005 update all Part Types 10/12/2005 Review/Integrate all outstanding ECNs Note: ***A new solderpaste stencil IS required***...
Page 78
UB0 Main PCB Rev.C Modifications Insert 100ohm resistor in series with each of the DC blocking caps for the CH1 and CH2 input (C25, C30, C31, and C35). Cut PCB traces (4 places) as indicated below:...
Page 79
Solder a 100ohm resistor onto PCB to bridge the cut (4 places):...
FRONT PANEL REV C Confidential Alesis Service Manual 8-31-0137-A...
Page 90
UB0FPA - Front Panel PCB Rev C Last Revised: RevChange Document 11/28/2005 Suggested Performed DATE DATE Description of change: Reason for change: SCH PCB CAM TOP LEVEL CHANGES 9/21/2005 Change revision to Rev C 9/21/2005 Update all Part Types 9/21/2005 Review/Integrate all outstanding ECNs 11/20/2005 11/28/2005...
Page 91
FRONT PANEL REV B Confidential Alesis Service Manual 8-31-0137-A...
Page 101
UB0FPB - Front Panel PCB Rev B Last Revised: RevChange Document 9/21/2005 Suggested Performed DATE DATE Description of change: Reason for change: SCH PCB CAM TOP LEVEL CHANGES 9/20/2005 9/21/2005 Change revision to Rev B 9/20/2005 Update all Part Types 9/20/2005 Review/Integrate all outstanding ECNs Note: ***A new solderpaste stencil IS NOT required***...
Page 102
ALESIS IO|2 (UB0) HISTORY Confidential Alesis Service Manual 8-31-0137-A...
Page 105
ALESIS IO|2 (UB0) Confidential Alesis Service Manual 8-31-0137-A...
Page 106
September 22, 2005 Note: Vendor is free to add/change/delete hardware (screws, nuts, etc.) in this BOM to optimize manufacturability. DESCRIPTION QTY REF UL CONFIGURATION 7-51-1219 SHEET WELCOME-TO-ALESIS-FAMILY 5 x 8" LITERATURE/PACKAGING 4-71-0015 CABLE USB 2 METERS A/B 7-22-0016 SOFTWARE CD UB0...
Need help?
Do you have a question about the IO/2 and is the answer not in the manual?
Questions and answers