Novell LINUX ENTERPRISE SERVER 10 SP1 - ARCHITECTURE-SPECIFIC INFORMATION Specification page 46

For ReadChannel, enter the number of the READ channel. For WriteChannel,
enter the number of the WRITE channel. DataChannel specifies the DATA
channel. For Portname, enter an appropriate port name. Make sure that the READ
channel carries an even device number.
• Interface hsi for HiperSockets and VM guest LANs:
ReadChannel=0.0.0624
WriteChannel=0.0.0625
DataChannel=0.0.0626
For ReadChannel, enter the appropriate number for the READ channel. For
WriteChannel and DataChannel, enter the WRITE and DATA channel
numbers.
A.2.3 Specifying the Installation Source and
Install=nfs://server/directory/CD1/
Specify the location of the installation source to use. Possible protocols are nfs,
smb (Samba/CIFS), ftp, and http.
If an ftp or smb URL is given, specify the user and password for FTP installation.
These parameters are optional and anonymous or guest login is assumed if they
are not given.
Username=<a user name>
Password=<a password>
In case of a Samba or CIFS installation, you can also specify the domain that should
be used:
Workdomain=<a domain>
UseSSH=1 UseVNC=1 Display_IP=192.168.42.42
Depending on which parameter you give, a remote X server, SSH, or VNC will be
used for installation. UseSSH enables SSH installation, UseVNC starts a VNC
36 Architecture-Specific Information
YaST Interface