nection Manually" (Chapter 30, Basic Networking, ↑Installation and Administra-
tion).
HostIP=192.168.55.23
Enter the IP address of the interface to configure.
Gateway=192.168.55.254
Specify the gateway to use.
Nameserver=192.168.123.123
Specify the DNS server in charge.
InstNetDev=osa
Enter the type of interface to configure. Possible values are osa, hsi. ctc, escon,
and iucv. (CTC, ESCON, and IUCV are no longer officially supported).
For the interfaces of type hsi and osa, specify an appropriate netmask and an
optional broadcast address:
Netmask=255.255.255.0
Broadcast=192.168.255.255
For the interfaces of type ctc, escon, and iucv (CTC, ESCON, and IUCV are
no longer officially supported), enter the IP address of the peer:
Pointopoint=192.168.55.20
OsaInterface=<lcs|qdio> OsaMedium=<eth|tr>
For osa network devices, specify the host interface (qdio or lcs) and the phys-
ical medium (eth for ethernet or tr for token ring).
Layer2=<0|1>
For osa QDIO ethernet devices, specify whether to enable OSI Layer 2 support.
Each of the interfaces requires certain setup options:
• Interfaces ctc and escon (CTC and ESCON are no longer officially supported):
ReadChannel=0.0.0424
WriteChannel=0.0.0425
34
Architecture-Specific Information
Need help?
Do you have a question about the LINUX ENTERPRISE SERVER 10 SP1 - ARCHITECTURE-SPECIFIC INFORMATION and is the answer not in the manual?