Additional Information; What's Next; Section 5.12, "Additional Information; Section 5.13, "What's Next - Novell LINUX ENTERPRISE SERVER 10 - STORAGE ADMINISTRATION GUIDE FOR EVMS Administration Manual

dmsetup message mapname 0 fail_if_no_path
Replace mapname with the correct map name, such as
3600601607cf30e00184589a37a31d911. This causes all queued I/O to fail and
propagates the error to the calling application.
2 Reactivate queueing by entering the following command at a terminal console prompt:
dmsetup message mapname 0 queue_if_no_path

5.12 Additional Information

For more information about configuring and using multipath I/O on SUSE Linux Enterprise Server,
see How to Setup/Use Multipathing on SLES (http://support.novell.com/techcenter/sdb/en/2005/04/
sles_multipathing.html) in the Novell Technical Support Knowledgebase.

5.13 What's Next

If you want to use software RAIDs, create and configure them before you create file systems on the
devices. For information, see Chapter 6, "Managing Software RAIDs with EVMS," on page 53.
Managing Multipath I/O for Devices 51