Novell LINUX ENTERPRISE SERVER 10 - STORAGE ADMINISTRATION GUIDE FOR EVMS Administration Manual page 62

6 Specify a human-readable label for the device.
7 Create a file system on the RAID device you created.
8 Mount the RAID device.
62 SLES 10 Storage Administration Guide for EVMS
For information about these settings, see
5e Click Create to create the RAID device under the /dev/evms/md directory.
The device is given a name such as md0, so its EVMS mount location is /dev/evms/
md/md0.
6a Select Action > Create > EVMS Volume or Compatible Volume.
6b Select the device that you created in
6c Specify a name for the device.
Use standard ASCII characters and naming conventions. Spaces are allowed.
6d Click Done.
7a Select Action > File System > Make to view a list of file system modules.
7b Select the type of file system you want to create, such as the following:
ReiserFS File System Module
Ext2/3FS File System Module
7c Select the RAID device you created in
7d Specify a name to use as the Volume Label, then click Make.
The name must not contain space or it will fail to mount later.
7e Click Save to create the file system.
"Configuration Options for RAIDs" on page
Step 5.
Step 5, such as /dev/evms/md/md0.
56.