4.3.1 Configuring Basic Settings
The basic LDAP client configuration dialog
guration"
(page 35)) opens during installation if you choose LDAP user management
or when you select Network Services > LDAP Client in the YaST Control Center in the
installed system.
Figure 4.2 YaST: LDAP Client Configuration
To authenticate users of your machine against an OpenLDAP server and enable user
management via OpenLDAP, proceed as follows:
1 Click Use LDAP to enable the use of LDAP. Select Use LDAP but Disable Logins
instead if you want to use LDAP for authentication, but do not want other users
to log in to this client.
2 Enter the IP address of the LDAP server to use.
(Figure 4.2, "YaST: LDAP Client Confi-
LDAP—A Directory Service
35