Adding A Profile Using The Wizard - Novell LINUX ENTERPRISE DESKTOP 11 - SECURITY GUIDE 17-03-2009 Manual

Update Profile Wizard
For detailed steps, refer to
(page 241).
AppArmor Reports
For detailed steps, refer to
AppArmor Control Panel
For detailed steps, refer to
Event Status" (page 243).
23.1 Adding a Profile Using the
Wizard
Add Profile Wizard is designed to set up Novell AppArmor profiles using the AppArmor
profiling tools, aa-genprof (generate profile) and aa-logprof (update profiles from
learning mode log file). For more information about these tools, refer to
"Summary of Profiling Tools"
1 Stop the application before profiling it to ensure that application start-up is
included in the profile. To do this, make sure that the application or daemon
is not running.
For example, enter rcPROGRAM stop (or /etc/init.d/PROGRAM
stop) in a terminal window while logged in as root, replacing PROGRAM
with the name of the program to profile.
2 Start YaST and select Novell AppArmor > Add Profile Wizard.
Section 23.5, "Updating Profiles from Log Entries"
Section 27.3, "Configuring Reports"
Section 23.6, "Managing Novell AppArmor and Security
(page 254).
Building and Managing Profiles with YaST
(page 293).
Section 24.6.3,
227