Novell LINUX ENTERPRISE DESKTOP 11 - ADMINISTRATION GUIDE 17-03-2009 Administration Manual page 118

10.2.4 Setting a Boot Password
Using this YaST module, you can also set a password to protect booting. This gives
you an additional level of security.
Procedure 10.4 Setting a Boot Loader Password
1 Open the Boot Loader Installation tab.
2 Click Boot Loader Options.
3 Set your password in Password for the Menu Interface.
4 Click OK.
5 Click Finish to save the changes.
10.2.5 Adjusting the Disk Order
If your computer has more than one hard disk, you can specify the boot sequence of
the disks to match the BIOS setup of the machine (see
vice.map"
Procedure 10.5 Setting the Disk Order
1 Open the Boot Loader Installation tab.
2 Click Boot Loader Installation Details.
3 If more than one disk is listed, select a disk and click Up or Down to reorder the
4 Click OK to save the changes.
5 Click Finish to save the changes.
106 Administration Guide
(page 101)). To do so, proceed as follows:
displayed disks.
Section 10.1.2, "The File de-