Table of Contents
Advertisement
Figure 6.1 Configuration Dialog with the Available Conduits
6.2 Configuring the Handheld
Connection
To be able to use KPilot, first set up the connection with the handheld computer. The
configuration depends on the type of cradle (docking unit) used with the handheld.
There are two types of these: USB cradles or cables and serial cradles or cables.
6.2.1 Configuring the Connection from
within KPilot
The easiest way to set up the connection is by using the configuration assistant. Do the
following:
1 Select Settings → Configuration Wizard to start the assistant.
Synchronizing a Handheld Computer with KPilot
145
Advertisement
Table of Contents
