Novell CLIENT FOR LINUX 2.0 SP3 - ADMINISTRATION Administration Manual page 22

default context for the tree is
administrator must add the following line in the nds.conf file:
context=o=xyz
You must ensure that the nds daemon is restarted after the changes to the config file is
completed. To do this, issue the following command:
rcndsd restart
NOTE: You may specify upto 16 different contexts with n4u.nds.bindery-context. Each
context must be separated by ";". For example,
context=o=xyz;ou=eng,o=acme
When you send a message to a group using the
groupname and not the FQDN of the groupname. For example, if a group named mygroup is
created in context mycontext, then the mygroup groupname must be specified with the
command instead of mygroup.mycontext.
22 Novell Client 2.0 SP3 for Linux Administration Guide
, then to search for the groups from Novell client, the eDir
abc
n4u.nds.bindery-
.
nwsend
n4u.nds.bindery-
command, you must specify only the
nwsend