Table of Contents
Advertisement
11 Start the Novell Client for Linux.
See
"Starting or Restarting the Novell Client for Linux" on page
For more information, see
"Using the Novell Client Tray
User Guide.
Starting or Restarting the Novell Client for Linux
Use any of the following methods to start or restart the Novell Client for Linux:
Restart the Linux Workstation: This is the best way to ensure that the Novell Client for
Linux is completely restarted.
Manually Start the Novell Client: Open a terminal window and log in as root. From the
/opt directory, enter one of the following commands:
New Installations: /opt/novell/ncl/bin/ncl_control start
This command loads all the Novell Client for Linux daemon modules.
Updates: /opt/novell/ncl/bin/ncl_control restart
This command stops and then reloads all the Novell Client for Linux daemon modules.
If either of these commands displays any errors, restart the Linux machine.
In addition, /opt/novell/ncl/bin/ncl_control status shows whether the NCL drivers
are loaded properly or not, and /opt/novell/ncl/bin/ncl_control stop stops all Novell
Client for Linux daemon modules.
I
N
N S T A L LIN G TH E
O V E L L
An installation script called ncl_install is provided in the Novell Client for Linux .tar.gz file
you downloaded from
Novell Downloads
install, update, verify installation, display information, and uninstall the Novell Client directly from a
command prompt using documented RPM commands. This same script is copied to the /opt/
novell/ncl/bin directory during the installation of the Client for later use in verifying or
uninstalling the Client.
Run these commands from the directory where you unarchived the Client download file or from
/opt/novell/ncl/bin after the initial installation. You must be logged in as root to run these
commands.
Application" in the Novell Client for Linux
C
U
I
LI EN T
S I N G T H E
(http://download.novell.com). This script can be used to
3.
S
N S T A LL A T IO N
CR IPT
Advertisement
Table of Contents
Need help?
Do you have a question about the CLIENT FOR LINUX 2.0 - QUICK START 18-09-2007 and is the answer not in the manual?
Questions and answers