Viewing The Status Of Recent Commands; Viewing Statistics; Section 8.8, "Viewing The Status Of Recent Commands; Section 8.9, "Viewing Statistics - Novell ACCESS MANAGER 3.1 SP1 - AGENT GUIDE Manual

8.8 Viewing the Status of Recent Commands

Agent commands are issued when the configuration of the agent is modified and when the agent is
stopped, started, or refreshed.
1 In the Administration Console, click Devices > J2EE Agents > [Name of Agent] > Command
Status.
2 Select one of the following actions:
Delete: To delete a command, select the check box for the command, then click Delete.
The selected command is cleared.
Refresh: To update the current cache of recently executed commands, click Refresh.
Name: To select all the commands in the list, click Name, then click Refresh or Delete.
3 View the information. The following columns display information about each command:

Column

Name

Status
Type
Admin
Date & Time
4 To view additional information about a command, click the name of a command.
5 Click Close.

8.9 Viewing Statistics

The following statistics allow you to monitor the sessions and run time of the J2EE Agent.
1 In the Administration Console, click Devices > J2EE Agents > [Name of Agent] > Statistics.

Description

Contains the display name of the command. Select this link to view
additional details about the command.
Specifies the status of the command, and includes such states as Pending,
Incomplete, Executing, Succeeded, Failed, Unsuccessful.
Specifies the type of command.
Specifies whether the system or a user issued the command. If a user
issued the command, the field contains the DN of the user.
Specifies when the command was issued. The date and time are displayed
in local time.
Managing a J2EE Agent 103