62533 Ethernet Adapter INSTALLATION AND OPERATING INSTRUCTIONS For sales and Service in Corporate Office: For sales and service in Europe and North America contact: 3651 Walnut Avenue, Asia contact: ESD Systems.com Chino, CA 91710 OK International - European Headquarters www.esdsystems.com...
Packaging: • 1 - Digi SP One Ethernet Adapter • 1 - Diagnostic Loop Back Key • 1 - Quick Start Guide • 1 - Release Note • 1 - Installation and Drivers CD-ROM • 1 - 100 ~ 240 V to 12VDC Power Adapter •...
Page 4
• Discover Device - The should unit should be located in the menu under model Digi One SP with an IP Address already assign to the unit. Depending on how your network is setup, you might need to manually enter an IP Address.
Figure 3. Refer to Figure 3. Disconnect and remove the Diagnostic Look Back from the model 50461. There should have been a DB9 Adapter included with your Smartlog X3 system, connect the DB9 Adapter to the serial port of the model 50461. Connect the 24”...
Specifications and Dimensions: Dimensions: Length: 3.882” in / 9.860cm Width: 1.679” in / 4.264cm Depth: 0.983” in / 2.496cm Weight: 2.29 oz / 65 g Troubleshooting: • Link LED or ACT not turning on when unit is powered Power down unit, re-power unit and push and hold reset button for 10-12 seconds. •...
LIMITED WARRANTY Semtronics expressly warrants that for a period of one (1) year from the date of purchase Semtronics 62533 will be free of defects in material (parts) and workmanship (labor). Within the warranty period, a unit will be tested, repaired, or replaced at our option, free of charge. Call Customer Service at 909- 627-8178 (Chino, CA) or 781-821-8370 (Canton, MA) for Return Material Authorization (RMA) and proper shipping instructions and address.