Fluke 105B User Manual page 142

Measuring Examples
•
Set the left cursor to the low level of the waveform:
see Figure 7-14. This is the 0% reference point.
–
Set the right cursor to the high level of the waveform:
see Figure 7-14. This is the 100% reference point.
—
The test tool instantly displays the rise time: "156 ns".
(See Figure 7-14.)
To identify the points on the slope where the measurement
has occurred, you can use the markers on page 3 within
the More Scope window.
Figure 7-14. Rise Time Measurement (with markers)
7 - 15