Fluke 105B User Manual page 133

7 - 6
To see the current as a waveform, set the test tool as
follows:

Set Current Probe range switch to 10 mV/A.

+
Do a Reset; probe scaling factor is 10:1.
‘
Select Scope mode.
’
Select Continuous Auto Set.
“ ¹
Select the Probe A menu.
”
Open the Probe on INPUT A box.
•
:10 mV/A
Select current range.
–
Close the window.
—
The test tool displays the current as a waveform,
which can be analyzed using all other functions. The
selected range appears on the top display.
¹
92B/96B/99B/105B
Figure 7-5. Current Measurement in Scope Mode
Users Manual