Advertisement
Quick Links
INSTALLATION INSTRUCTIONS
SPECIFICATIONS
Voltage................................................................................................................ 120VAC, 60HZ
Load(Single Pole Circuit)
Tungsten................................................................................................................... 1200W
Resistive................................................................................................................... 1800W
Motor......................................................................................................................... 1/2 HP
Time Delay.................................................................................5, 10, 30, 60 mins, 2 or 4 hours
Environment....................................................................................Commercial Indoor use only
Humidity............................................................................................ 95% RH, non-condensing
Operating Temperature.......................................................................32° to 131° F (0° to 55° C)
DESCRIPTION
The HET06-R is a timer switch with 6 preset time buttons and 1 Manual ON button. All Loads
connect to this timer will automatically turn OFF when the selected time expires. The 6
selectable times are 5 Min, 10 Min, 30 Min, 60 Min, 2 Hours, and 4 Hours.
FEATURES
• Easily replaces a standard single pole Light or Fan switch.
• Compatible with most types of lights.
• Attractive blue LED indicators conveniently located next to each button
• Indoor use only
Preset 7-Button Timer Switch
1
HET06-R
Advertisement
Related Manuals for Enerlites HET06-R
Summary of Contents for Enerlites HET06-R
- Page 1 Operating Temperature...............32° to 131° F (0° to 55° C) DESCRIPTION The HET06-R is a timer switch with 6 preset time buttons and 1 Manual ON button. All Loads connect to this timer will automatically turn OFF when the selected time expires. The 6 selectable times are 5 Min, 10 Min, 30 Min, 60 Min, 2 Hours, and 4 Hours.
- Page 2 WARNING Turn the POWER OFF at the circuit breaker before installing the Timer Read and understand these instructions before installing. It is recommended that a qualified electrician performs this installation. Make sure to turn off the circuit breaker or fuse(s) and make sure power is off before wiring the device.
- Page 3 To the fullest extent permitted by the applicable state law, Enerlites shall not be liable to the purchaser or end user customer of Enerlites products for direct, indirect, incidental, or consequential damages even if Enerlites has been advised of the possibility of such damages.
Need help?
Do you have a question about the HET06-R and is the answer not in the manual?
Questions and answers