Installing The Processor Fan Heat Sink; Install Processor; Close The Load Plate - Intel 915G - Matx DDR2-533 LGA775 Product Manual

Intel Desktop Board D915GEV/D915GUX/D915GAV/D915GAG Product Guide
6. Hold the processor with your thumb and index fingers oriented as shown in Figure 11. Make
sure fingers align to the socket cutouts (see Figure 11, F). Align notches (see Figure 11, G)
with the socket see (Figure 11, H). Lower the processor straight down without tilting or sliding
the processor in the socket.
7. Pressing down on the load plate (Figure 12, I) close and engage the socket lever (Figure 12, J).

Installing the Processor Fan Heat Sink

Desktop Board D915GEV/D915GUX/D915GAV/D915GAG has an integrated processor fan heat
sink retention mechanism (RM). For instructions on how to attach the processor fan heat sink to
the integrated processor fan heat sink RM, refer to the boxed processor manual or the Intel World
Wide Web site at:
http://support.intel.com/support/processors/pentium4/intnotes478.htm
34
G
G
H
F
Figure 11. Install Processor
J
I
Figure 12. Close the Load Plate
H
F