You can send your phone number to another party. Your
phone number will be shown on the receiver's phone.
Your phone number will not be shown.
If you select this, you can send your phone number
depending on two line service such as line 1 or line 2.
If you select Activate, you can accept a waiting (receiving)
call.
If you select Cancel, you cannot recognize the waiting
(receiving) call.
Shows the status of Call waiting.
If you select
, you can check the call duration by deep sound
every minute during a call.
36
In this menu, you can set the phone to ask for the PIN code of
your SIM card when the phone is switched on. If this function is
activated, you'll be requested to enter the PIN code.
If you enter wrong PIN code more than 3 times, the phone will
lock out. If the PIN is blocked, you will need to key in PUK code.
You can enter your PUK code up to 10 times. If you put wrong
PUK code more than 10 times, you can not unlock your phone.
You will need to contact your service provider.
You can use security code to avoid unauthorized use of the
phone. Whenever you switch on the phone, the phone will
request security code if you set phone lock to On. If you set
phone lock to
, your phone will request security code
only when you change your SIM card.
The Call barring service prevents your phone from making or
receiving certain category of calls. This function requires the
call barring password.
You can view the following submenus.