Table of Contents
Advertisement
2) Loading the Image
Press Click the 'EBOOT,' 'PDA,' and 'Phone' buttons each to select the appropriate images.
EBOOT - BootImage.nb0
PDA
- Flash.bin
Phone
- MIRAGE_ORANGE_BVxxx.bin
3) Preparing to start 'Detect'
Click the 'Detect' button on the bottom left side of the menuat the left bottom.
4) Connecting testing devices
Connect testing devices to the cable and turn on the power.
The connection is complete if the 'Device 1 Detected' appears in the box on the bottom left sideat the
left bottom and the PDA1 at on the right side turns green.
This Document can not be used without Samsung's authorization
SAMSUNG Proprietary-Contents may change without notice
4-13
Array course control
Advertisement
Table of Contents
Troubleshooting
