Assembly Instructions - Samsung i640 Service Manual

Disassembly and Assembly Instructions

11-2. Assembly Instructions

1) Screw 2 point on the wheel key sus
1
1) Notice the plastics not be damaged or
scratched.
1) Slide in the WHEEL KEY FPCB / TOUCH KEY
3
FPCB into the corresponding connector
1) Notice the FPC not be damaged
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
1) Put the LCD SUB PBA onto the UPPER
2
slide
2) Screw 2 point of LCD sub PBA
1) Notice the PBA not be damaged
1) Connect the main FPC.
4
2) Connect the MEGA CAMERA FPCB
3) Connect the MOTOR/VGA CAM/RECEIVER FPCB
1) Notice the FPC not be damaged
2) Make sure alll components are exactly in
place
11-6