Baby Einstein Sea Dreams Soother, 17428-WS Manual

Parts List and Drawing

Disabling Try-me Mode

Try-me pull tab

Battery Installation

The crib toy requires (4) size C/LR14 (1.5V) batteries for normal operation (not included).
NOTE: The batteries included (C/R14) are for in-store product demonstration. For best performance, promptly replace with new alkaline batteries.
The IR remote control requires (2) size AAA/LR03 batteries (not included). Please use alkaline batteries for better performance.

Follow the battery guidelines in this section. Otherwise, battery life may be shortened or the batteries may leak or rupture.

• Always keep batteries away from children.
• Do not mix old and new batteries.
• Do not mix alkaline, standard, or rechargeable batteries.
• Only batteries of the same or equivalent type as recommended are to be used.
• Install the batteries so that the polarity of each one matches the markings in the battery compartment.
• Do not short-circuit the batteries.
• Do not store batteries in areas that have extreme temperatures (such as attics, garages, or automobiles).
• Remove exhausted batteries from the battery compartment.
• Never attempt to recharge a battery unless it is specifi cally marked "rechargeable." Rechargeable batteries are to be removed from the toy before being charged.
• Rechargeable batteries are only to be charged under adult supervision.
• Do not use rechargeable alkaline batteries in a Ni-Cad or Ni-MH battery charger.
• Please use the correct disposal method for batteries.
• Remove batteries before putting product into storage for a prolonged period of time. Do not dispose of product or batteries in fire, batteries may explode or leak.

This symbol indicates that the product is not to be disposed of in household waste as batteries contain substances that can be damaging to the environment and health. Contact local authority for recycling & collection information.

Main Unit

IR Remote

Perfect Fit Crib Attachment™ Assembly

Mounting Instructions

Operating Instructions

Power/volume Switch – Slide the switch from the OFF position to either Low or High to select the master volume for music or nature sounds playback.
Mode Selector Switch – Use the Mode Switch to select the desired active functions for initial playback: music or nature sounds, and whether to include lights or motion in the sea scene. Playback functions gently diminish at 10-minute intervals.

• After 10 minutes, the water reflections stop, and volume level reduces.
• After 20 minutes, the two blue LEDs turn off, the motor stops and the volume level reduces.
• After 25 minutes, music or nature sounds turn OFF. The unit enters Standby Mode, and the crib check light function will be available.

Play/stop buttons – Press the button (on main unit or on IR remote) to start the music or nature sound playback sequence (with lights and motion, depending on the selected mode). Press the button again to stop playback. The play list includes 9 melodies and natural water sounds.
IR Remote Sensor – The IR remote control provides the Play/stop function from any location with a direct view of the crib toy (360° within 12 ft. range). The main unit will sense remote control input at any time during playback or for up to two hours after entering Standby Mode. To activate the IR sensor, the main unit must be ON and active (press Play/stop, etc.).
Low Battery Indicator: The Low Battery function detects weak batteries and suspends normal soother operation and music. The battery indicator blinks red when the batteries are weak. When the batteries are fully depleted, the battery indicator illuminates continuously, and the soother will no longer function.
To restore normal operation, replace all batteries with new alkaline size C batteries
NOTE: Weak batteries cause erratic product operation, including distorted sound, dimming or failed lights, and slow or non-working motorized parts. Because each electrical component requires a different operating voltage, replace the batteries when any function fails to operate.

Using the Remote Control

The infrared (IR) remote control provides the Play/stop function from any location with a direct view of the crib toy (360° within 12 ft. range). Aim the remote control at the IR sensor on top of the crib toy and press the Play/stop Button. Be sure there are no obstructions directly between the remote control and the sensor.
NOTE: Bright sunlight or artificial light may reduce the crib toy's sensitivity to the remote control. To increase the control range, reduce ambient light at the crib toy.
The remote control has a built-in hanger loop for storage at a handy location. Pivot the loop outward to deploy for use.

Troubleshooting

Care and Cleaning

Cleaning – Wipe the crib toy housing with a damp cloth. Do not immerse toy in water.
Storage – Do not leave in direct sunlight. Store in a cool, dry place.

The crib toy has no consumer serviceable parts inside. DO NOT disassemble the crib toy.

WARNING

To Prevent Serious Injury or Death:

• ALWAYS use the straps provided to attach the crib toy to the baby crib.
• NEVER attach any additional strings or straps to the crib toy.

HEAD ENTRAPMENT HAZARD:

• ALWAYS keep the bottom of the crib toy at least 7 inches (18 cm) above the surface of the mattress.
• If the toy is mounted to an adjustable crib side rail, ALWAYS keep the side rail in the raised (locked) position when the baby is in the crib.

• Adult assembly is required to mount the crib toy and to change the batteries.
• Care should be taken when unpacking the crib toy.
• Examine product frequently for damaged, missing, or loose parts.
• Do not use product if damaged or broken.