Table of Contents
Advertisement
• Congratulations on your purchase of a new Baby Einstein
Please read all instructions before assembly and use of the crib toy.
• ¡Felicitaciones por haber comprado un producto de Baby Einstein
Lea todas las instrucciones antes de armar y usar este juguete para cuna.
• Félicitations pour avoir acheté un produit Baby Einstein
totalité des instructions avant le montage et l'utilisation du jouet pour berceau.
IMPORTANT! KEEP FOR FUTURE REFERENCE.
¡IMPORTANTE! CONSÉRVELO PARA REFERENCIA FUTURA.
IMPORTANT! À CONSERVER POUR CONSULTATION FUTURE.
www.kidsii.com
Baby Einstein
Sea Dreams Soother
ENGLISH • ESPAÑOL • FRANÇAIS
™
product!
™
! Veuillez lire la
™
!
™
90609-3WS
Advertisement
Table of Contents
Need help?
Do you have a question about the Sea Dreams Soother and is the answer not in the manual?
Questions and answers
Music isn't playing
The music may not be playing on the Baby Einstein Sea Dreams Soother for several reasons:
1. Demo Mode: If the unit is new, the demo mode tab may still be in place. Remove it to enable full functionality.
2. Battery Issues: Ensure the main unit has 4 "C" batteries and the remote has 2 "AAA" batteries, and replace them if they are depleted.
3. Standby Mode: The unit enters standby mode after 25 minutes. Press the play button on the main unit or use the remote to restart playback.
4. Remote Signal: The infrared remote needs to be within 3.5 to 4.5 meters (12 to 15 feet) and in a direct line of sight with the soother.
5. Volume Setting: If the volume is too low, adjust it using the volume controls on the main unit.
6. Faulty Unit: If none of the above solutions work, the unit may be defective.
This answer is automatically generated
Who is the manufacturer for the Baby Einstein aquarium? We have 2 units that are no longer working.
The Baby Einstein Sea Dreams Soother is manufactured by Baby Einstein.
This answer is automatically generated
New Crib aquarium stoped working
To fix a Baby Einstein Sea Dreams Soother that has stopped working, try the following steps:
1. Check the Batteries – Ensure the batteries are properly installed and replace them if they are old or depleted.
2. Inspect the Battery Compartment – Look for any corrosion or dirt in the battery compartment and clean it if necessary.
3. Ensure Proper Attachment – Make sure the soother is securely attached to the crib using the provided straps.
4. Reset the Device – Remove the batteries for a few minutes, then reinstall them to reset the soother.
5. Check the Remote – If using the remote, verify that its battery is functional and replace it if needed.
6. Confirm Sound and Light Settings – Adjust the volume and light settings to ensure they are not turned off.
If the soother still does not work, consult the product manual for further troubleshooting or contact the manufacturer for support.
This answer is automatically generated
How do I purchase the crib strap and remote?