Advertisement
Quick Links
4D-V49
Suitable for ages over 14
Quadcopter operating instructions
Regular edition
English
●
In order to meet the requirements of the aeronautical radio station's
electromagnetic environment (various of aero models and UAV are
not allowed to fly within the range of 10 km on each side of center
line and 20km on both ends of the airport runway and in the) and
civil aviation routes and airlines. Using various models and drones
in the no-fly zone issued by the relevant state departments is
prohibited.
Advertisement
Related Manuals for 4DRC 4D-V49
Summary of Contents for 4DRC 4D-V49
- Page 1 4D-V49 Suitable for ages over 14 Quadcopter operating instructions Regular edition English ● In order to meet the requirements of the aeronautical radio station's electromagnetic environment (various of aero models and UAV are not allowed to fly within the range of 10 km on each side of center line and 20km on both ends of the airport runway and in the) and civil aviation routes and airlines.
- Page 2 Warning 1. The packaging and instructions contain important information and should be kept. 2. With this aircraft, you are responsible for ensuring that no harm will be caused to the personal and property of others. 3. Commissioning and installing of aircraft must be strictly in accordance with the operating instructions, and attention shall be paid to the distance between the aircraft and the user or other people shall be 2 to 3m to prevent the aircraft from bumping into the head, face and body of people and causing injury in flying and landing, etc.
- Page 3 1. List of accessories included Remote control ×1 Aircraft×1 USB charging Fan blade×4 Lithium Screwdriver×1 Operating cable×1 battery×1 Instructions×1 2. Name of each part of aircraft Fan blade Shell Power Switch Motor Battery LED lights 3. Wind blade installation diagram Remove the fan blade.
- Page 4 4. Lithium battery charging instructions 4.2 Remove the battery. 4.1 Push rightwards in accordance with the drawing. Laptop Desktop Mobile USB adapter USB power power socket 4.3 Charging: Insert the USB port of the USB charging cable into the computer USB port (or use 2A power adapter), and connect the other end of the USB charging cable to the battery socket.
- Page 5 Instructions in charging: Warning When not flying, please do not install • Do not put the charged battery in a place with high temperature the battery in the aircraft to avoid and heat, such as an open flame or an electric heating device, battery damage.
- Page 6 8.3 Horizontal calibration Press and hold the calibration button on the remote control , the LED light on the aircraft flashes quickly. The LED lights on the aircraft are always on, which means the calibration is complete, and the remote controller emits a "beep" (Figure 1). Note: The calibration must be completed only when the aircraft is placed on a horizontal plane.
- Page 7 9. Introduction of remote control function and operation 9.1 Remote control method When the left joystick (throttle) is pushed up, the rotation rate of the main blade increases and the aircraft rises. When the left joystick (throttle) is pushed down, the rotation rate of the main blade slows down and the aircraft descends.
- Page 8 9.2.3 Roll Forward 360° Short press the 360 tumble button, then push the right joystick upward, and the aircraft will turn forward 360° correspondingly. 9.2.4 360° roll backward Short press the 360° roll button, then push the right joystick down, and the aircraft will flip 360° backward accordingly.
- Page 9 9.5 Headless mode The front of the aircraft when the code-matching is turned on is by default the front in headless mode; if it is necessary to adjust the direction, please turn on the code-matching again, and short press the remote controller "headless mode" function key (Figure 6).
- Page 10 9.8 Induction mode The aircraft is in flight, short press the function key "sensing mode / one-button rotate" on the remote control, red LED light of remote control slowly flashes and go into induction mode, at this time the aircraft can be operated referring to (Figure 10 to Figure 14). (When using interactive induction function, the palms should be about 10cm away from fuselage, it's neither too far nor too close which may impact the induction function.
- Page 11 10. FAQ and solving guidelines Question Reason Solution The aircraft indicator flashes The aircraft has insufficient power Charge the battery without any response 1. Charge the battery 1. Low battery 2.1 Replace the blade 2.1 Blade deformation The blades of the aircraft rotate 2.2 The fan blades are printed with letters 2.2 Installation error of AB but cannot fly...
Need help?
Do you have a question about the 4D-V49 and is the answer not in the manual?
Questions and answers