Download
Share
Print this page
Samsung EX2F Service Manual
  1. Manuals
  2. Brands
  3. Samsung Manuals
  4. Digital Camera
  5. SAMSUNG EX2F
  6. Service manual
Samsung EX2F Service Manual

Samsung EX2F Service Manual

Hide thumbs Also See for EX2F:

Advertisement

Quick Links

Download this manual
DIGITAL CAMERA
EX2F
SERVICE
Manual
DIGITAL CAMERA
CONTENTS
1. Repair information
2. Product specifications
3. Disassembly and Reassembly
4. Troubleshooting
5. PCB diagram
6. Block diagram
7. Firmware update
8. Adjustment
9. Exploded view and parts list

Advertisement

loading
Need help?

Need help?

Do you have a question about the EX2F and is the answer not in the manual?

Questions and answers

Related Manuals for Samsung EX2F

Summary of Contents for Samsung EX2F

  • Page 1 DIGITAL CAMERA EX2F SERVICE Manual DIGITAL CAMERA CONTENTS 1. Repair information 2. Product specifications 3. Disassembly and Reassembly 4. Troubleshooting 5. PCB diagram 6. Block diagram 7. Firmware update 8. Adjustment 9. Exploded view and parts list...
  • Page 2 Contents 1. Repair information 1-1 Customer satisfaction statement ..........1-1 1-2 Warranty and repair service information ........1-1 1-3 Precaution for disassembly and reassembly ......... 1-4 2. Product specifications 2-1 Specifications ................2-1 2-2 Product comparison ..............2-2 2-3 Accessories information ............... 2-3 2-4 About the memory card ..............
  • Page 3 Contents 6. Block diagram 6-1 Block diagram ................6-1 7. Firmware update 7-1 Factory reset................7-1 7-2 Version check ................7-2 7-3 Firmware update ................. 7-3 7-4 How to update the fimware when forced to quit......7-5 8. Adjustment 8-1 Basic guide for adjustment ............8-1 8-2 OIS CENTERING ADJ ..............
  • Page 4 In the event that a valid date of purchase is not available, the warranty period will be determined by the date of manufacture. The warranty period shall be decreased to three months from the original product manufactured date. Copyright© 1995-2012 SAMSUNG. All rights reserved.
  • Page 5 Our liability under this warranty shall be limited to the following: a. In the event of a same malfunction problem within two months after repair service by Samsung authorized technician, we will repair or replace free of charge the component of the product which is found to be defective.
  • Page 6 Defect occurring after the expiration of the Warranty Period. b. Damage due to negligence, immersion in water, impact, loss and tampering. c. Repair or alteration performed by any party other than Samsung authorized technicians. d. Misuse or other improper use of the power button.
  • Page 7 Use an anti-static mat as well as an anti-static wrist strap to avoid ESD damage to PCB. The use wooden or plastic tweezers is recommended for manual placement. CONNECTOR Metal tip tweezer might make marks or damage. BARREL Always follow proper direction while assembling the components of the barrel. Copyright© 1995-2012 SAMSUNG. All rights reserved.
  • Page 8 * The power source may differ depending on your region. Dimensions (W X H X D) / Weight 112.1 X 62.4 X 27.55 mm (without protrusions) / 286 g (without battery and memory card) Copyright© 1995-2012 SAMSUNG. All rights reserved.
  • Page 9 * The power source may differ depending on the country. country. Mobile Link, Remote Viewfinder, Social Sharing, Wireless Network Email, Cloud, Auto Backup, TV Link, Wi-Fi Direct * This specifications can change without notice to upgrade a performance. Copyright© 1995-2012 SAMSUNG. All rights reserved.
  • Page 10 2-3 Accessories information • The illustrations may differ slightly from the items shipped with your product. • You can purchase optional accessories at a retailer or a Samsung service center. Samsung is not responsible for any problems caused by using unauthorized accessories.
  • Page 11 Shutter release AD64-03699A 1109-001446 Memory card 1109-001420 1109-001396 * Note: The contents may vary depending on the country. Memory card / Memory card adapter 3719-001319 * Note: The contents may vary depending on the country. Copyright© 1995-2012 SAMSUNG. All rights reserved.
  • Page 12 * The figures above are measured without using the zoom function. * Available recording time may vary if you use the zoom. * Several videos were recorded in succession to determine the total recording time. Copyright© 1995-2012 SAMSUNG. All rights reserved.
  • Page 13 Record videos at resolution and 30 FPS. 90 min * The figures above are measured by Samsung’s standards. Your results may differ, depending on your actual usage. * Several videos were recorded in succession to determine the total recording time.
  • Page 14 1. Remove the 2 screws on the left side, 2 screws on the right side and 2 screws on the bottom side. SCREW-MACHINE (M1.4 X L4 / BLK) SCREW-MACHINE (M1.4 X L4 / BLK) 6001-002152 6001-002152 SCREW-MACHINE (M1.4 X L4 / BLK) 6001-002152 Fig. 3-1 Copyright 1995-2012 SAMSUNG. All rights reserved. ⓒ...
  • Page 15 SPRING HOTSHOE Fig. B Fig. 3-2 4. Insert open pry tool around the join of locking structure part to release the ASSY COVER BACK as illustrated in image below. ASSY COVER BACK Fig. 3-3 Copyright 1995-2012 SAMSUNG. All rights reserved. ⓒ...
  • Page 16 5. Remove the FPCB from the connector as illustrated in Fig. C. Remove the FPCB. 1. It is installed. 2. Remove. Fig. C Fig. 3-4 6. Remove the ASSY COVER BACK. ASSY COVER BACK Fig. 3-5 Copyright 1995-2012 SAMSUNG. All rights reserved. ⓒ...
  • Page 17 2. Remove. Fig. D 그림C Fig. 3-6 9. Remove the following parts in the order indicated below. ① ASSY PCB KEY ② BUTTON REC ① ASSY PCB KEY ② BUTTON REC Fig. 3-7 Copyright 1995-2012 SAMSUNG. All rights reserved. ⓒ...
  • Page 18 1. Open the ASSY-OLED_HINGE to the left. ASSY-OLED_HINGE SCREW-MACHINE (M1.7 X L4 / BLK) 6001-002316 2. Rotate it toward to down direction. Fig. 3-8 11. Remove the COVER-LCD TOP. COVER-LCD TOP Fig. 3-9 Copyright 1995-2012 SAMSUNG. All rights reserved. ⓒ...
  • Page 19 Make sure to attach the SHEET-MR not to cause the surface malfunction. SHEET-MR Remove the FPCB from the connector. 2. Remove. 1. Open. FPCB FPCB Fig. E Fig. 3-10 13. Remove the ASSY-OLED_HINGE. ASSY-OLED_HINGE Fig. 3-11 Copyright 1995-2012 SAMSUNG. All rights reserved. ⓒ...
  • Page 20 Disassembly and Reassembly 14. Remove the 6 screws. SCREW-TAPTYPE (M1.4 X L4 / NI) 6003-001739 Fig. 3-12 15. Remove the FRAME MAIN. FRAME MAIN Fig. 3-13 Copyright 1995-2012 SAMSUNG. All rights reserved. ⓒ...
  • Page 21 1. Open. FPCB 2. Remove. FPCB Remove the WiFi antenna. 1. It is installed. 2. Remove. Fig. G Fig. H Fig. 3-14 18. Remove the MAIN PCB ASSY. MAIN PCB ASSY Fig. 3-15 Copyright 1995-2012 SAMSUNG. All rights reserved. ⓒ...
  • Page 22 Remove the FPCB from the connector. FPCB FPCB 그림 3-21 Fig. J 1. Open. 2. 분리하세요. Fig. 3-16 20. Remove the ASSY BARREL CCD and MAIN PCB ASSY. ASSY BARREL CCD MAIN PCB ASSY Fig. 3-17 Copyright 1995-2012 SAMSUNG. All rights reserved. ⓒ...
  • Page 23 Disassembly and Reassembly 21. Remove the screw. SCREW-MACHINE (M1.4 X L2 / NI) 6001-002165 Fig. 3-18 22. Remove the ASSY CHAMBER. ASSY CHAMBER Fig.3-19 3-10 Copyright 1995-2012 SAMSUNG. All rights reserved. ⓒ...
  • Page 24 Remove the FPCB from the connector. Discharging FPCB FPCB 1. Open. 2. Remove. Fig. K Fig. M SCREW-TAPTYPE (M1.4 X L4 / NI) 6003-001739 Fig. L Fig. 3-20 Copyright 1995-2012 SAMSUNG. All rights reserved. 3-11 ⓒ...
  • Page 25 27. Remove the ASSY STROBO PCB. ASSY STROBO PCB Fig. 3-21 28. Remove the 2 screws. 29. Remove the PLATE HOT SHOE. PLATE HOT SHOE SCREW-MACHINE (M1.7 X L5 / NI) 6001-002281 Fig. 3-22 3-12 Copyright 1995-2012 SAMSUNG. All rights reserved. ⓒ...
  • Page 26 Disassembly and Reassembly 30. Remove the 2 screws. SCREW-MACHINE (M1.4 X L2 / NI) 6001-002165 Fig. 3-23 31. Remove the ASSY COVER TOP. ASSY COVER TOP Fig. 3-24 Copyright 1995-2012 SAMSUNG. All rights reserved. 3-13 ⓒ...
  • Page 27 납땜 제거시 주변 회로소자 및 기구물에 주의하세요. Fig. N SCREW-TAPTYPE (M1.4 X L3.5 / BLK) 6003-001630 Fig. 3-25 34. ASSY TOP F-PCB와 BASE HOT SHOE를 분리합니다. ASSY TOP F-PCB BASE HOT SHOE FIg. 3-26 3-14 Copyright 1995-2012 SAMSUNG. All rights reserved. ⓒ...
  • Page 28 ④ MODE DIAL CLICK BALL ⑤ SPRING ETC MODE DIAL ② ASSY MODE DIAL A ③ ASSY MODE DIAL B ④ MODE DIAL CLICK BALL ⑤ SPRING ETC MODE DIAL ① PLATE MODE DIAL Fig. 3-28 Copyright 1995-2012 SAMSUNG. All rights reserved. 3-15 ⓒ...
  • Page 29 39. Remove the screw. 40. Remove the 3 locking structure parts marked in circle as illustrated in Fig. N with tweezers. SCREW-TAPTYPE (M1.4 X L2 / NI) 6003-001661 Fig. P Fig. 3-30 3-16 Copyright 1995-2012 SAMSUNG. All rights reserved. ⓒ...
  • Page 30 ① PLATE GUIDE POP-UP ② CUSHION MIC ③ ASSY MIC ① PLATE GUIDE POP-UP ② CUSHION MIC ③ ASSY MIC FIg. 3-31 42. Remove the screw. SCREW-TAPTYPE (M1.4 X L2 / NI) 6003-001661 Fig. 3-32 Copyright 1995-2012 SAMSUNG. All rights reserved. 3-17 ⓒ...
  • Page 31 45. Insert tweezers around the join of locking structure part between COVER TOP and ASSY POP-UP to release ASSY POP-UP. Then remove the ASSY POP-UP. ASSY POP-UP COVER TOP Fig. S COVER TOP Fig. R KNOB FLASH Fig. Q Fig. 3-34 3-18 Copyright 1995-2012 SAMSUNG. All rights reserved. ⓒ...
  • Page 32 47. Remove the following parts in the order indicated below. ① ASSY PCB FPC-EX2F_CIS ② CUSHION-IR ③ CUSHION-IR CUT FILTER ① ASSY PCB FPC-EX2F_CIS ② CUSHION-IR ③ CUSHION-IR CUT FILTER Fig, 3-36 Copyright 1995-2012 SAMSUNG. All rights reserved. 3-19 ⓒ...
  • Page 33 3-2 Barrel Disassembly 1. Remove the 7 scrws. SCREW-TAPTYPE (M1.4 X L3.5 / BLK) 6003-001630 Fig. 3-27 2. Remove the FPCB from the connector as illustrated in Fig. A. 3. Remove the locking structure part as illustrated in Fig. B. Remove the FPCB from the connector.
  • Page 34 Disassembly and Reassembly 4. Remove the ASSY LENS BASE. ASSY LENS BASE Fig. 3-39 5. Remove the FPCB from the loop part. Fig. 3-40 Copyright 1995-2012 SAMSUNG. All rights reserved. 3-21 ⓒ...
  • Page 35 Disassembly and Reassembly 6. Remove the BARREL-BASE. BARREL-BASE Fig. 3-41 7. Remove the BARREL-CAM. BARREL-CAM Fig. 3-42 3-22 Copyright 1995-2012 SAMSUNG. All rights reserved. ⓒ...
  • Page 36 Disassembly and Reassembly 8. Remove the DECO RING-CAM. DECO RING-CAM Fig. 3-43 9. Remove the BARREL-GUIDE. BARREL-GUIDE Fig. 3-44 Copyright 1995-2012 SAMSUNG. All rights reserved. 3-23 ⓒ...
  • Page 37 1. Align the 3 corresponding positions respectively as illustrated in Fig. A and B. ⓐ Once the correct alignment for position is accomplished, install the BARREL-ZOOM. FIg. A ⓐ ⓐ BARREL-ZOOM RING Fig. B Fig. 3-46 3-24 Copyright 1995-2012 SAMSUNG. All rights reserved. ⓒ...
  • Page 38 4. Align the 3 corresponding positions respectively as illustrated in Fig. F and G. ⓐ Once the correct alignment for position is accomplished, install the DECO RING-CAM. Fig. F ⓐ ⓐ Fig. E DECO RING-CAM Fig. G Fig. 3-48 Copyright 1995-2012 SAMSUNG. All rights reserved. 3-25 ⓒ...
  • Page 39 6. Align the 3 corresponding positions respectively as illustrated in Fig. J and K. ⓐ ⓑ Once the correct alignment for position is accomplished, install the BARREL-BASE. Fig. J ⓑ ⓐ ⓑ ⓐ ⓑ ⓑ BARREL-BASE Fig. K Fig. 3-50 3-26 Copyright 1995-2012 SAMSUNG. All rights reserved. ⓒ...
  • Page 40 Fig. N and O. Then install the ASSY LENS BASE. ⓐ ASSY LENS BASE Align the corresponding position Fig. N ⓐ ⓐ ⓑ Align the corresponding position ⓑ ⓑ Fig. O Fig. 3-52 Copyright 1995-2012 SAMSUNG. All rights reserved. 3-27 ⓒ...
  • Page 41 9. Install the FPCB as illustrated in Fig. P and Q. Fig. P Install the FPCB. FPCB FPCB Fig. Q 1. Insert. 2. Close. Fig. 3-53 10. Tighten the 7 screws. SCREW-TAPTYPE (M1.4 X L3.5 / BLK) 6003-001630 Fig. 3-54 3-28 Copyright 1995-2012 SAMSUNG. All rights reserved. ⓒ...
  • Page 42 Symptom Explanation/Solution Working voltage of backside of the MAIN PCB on R38 is 3.3V. When voltage drops below 1V or below, there is a problem. The product does not turn on. Change MAIN PCB. Copyright© 1995-2012 SAMSUNG. All rights reserved.
  • Page 43 Troubleshooting 4-2 Regarding to LCD screen display Symptom Explanation/Solution PMIC damage can cause the problem. LCD screen displays black screens. Change PMIC or MAIN PCB. IC damage due to VBAT short Copyright© 1995-2012 SAMSUNG. All rights reserved.
  • Page 44 However, pink horizontal line appears on LCD screen when capturing Check MR SHEET is on the connection between CIS FPCB and Main. the image of an object. (MAIN FRAME or SHORT problem) Make sure to attach MR SHEET Copyright© 1995-2012 SAMSUNG. All rights reserved.
  • Page 45 4-4 Regarding to video capture Symptom Explanation/Solution Resistance to CIS FPCB, capacity or no sodeirng can cause the problem. LCD screen displays noises when capturing video. Check the solder connections and solder again. Change CIS FPCB. Copyright© 1995-2012 SAMSUNG. All rights reserved.
  • Page 46 Peeling off the coating of electric wire may cuase short out. Power can be turned on and off. Camera turns off automatically when playing video or audio. Check the speaker and electric wire. Use care for and store electric wire. Speaker Copyright© 1995-2012 SAMSUNG. All rights reserved.
  • Page 47 45PIN LENS CON. FPCB CON. CIS_51PIN MAIN PCB LCD 40PIN CON. FPCB FPCB CON. HDMI D- SD CARD BATTERY TYPE SLOT CON. FPCB CON. CON. BATTERY USB CABLE USB CABLE SD CARD HDMI CABLE Copyright© 1995-2012 SAMSUNG. All rights reserved.
  • Page 48 PCB diagrams 5-3 Strobe HPCB 5-2 MAIN PCB BOTTOM BOTTOM Copyright© 1995-2012 SAMSUNG. All rights reserved.
  • Page 49 PCB diagrams 5-4 Top FPCB 5-6 AMOLED FPCB 5-7 CIS FPCB 5-5 LCD ext. FPCB Copyright© 1995-2012 SAMSUNG. All rights reserved.
  • Page 50 Charger LED MODE_ADC1 (R2051T01) Hot shoe MIC[L,R] _P MIC[L,R] _N AF LED Audio Codec (Stereo) 32.768KHz SD card Ext. MIC (WM8994ECS) Shutter SW Speaker SPKOUT_N,P (Mono) Accessory Speed dial Zoom SW EXT_STR_SPI KEY_HALL[0,1] Copyright© 1995-2012 SAMSUNG. All rights reserved.
  • Page 51 WIDE direction + Shutter button completely Wide direction Shutter button completely Fig. 7-2 3. Turn on the camera to view the product reset setting. Time Zone London > Date/Time Set 01/01/2012 >> Exit Move Fig. 7-3 Copyright© 1995-2012 SAMSUNG. All rights reserved.
  • Page 52 4. The current firmware version is displayed on the LCD screen. FW Version DSC: G206142 OIS : 1205231 FW Version DSC: G206142 S/N : 123456789012 OIS : 1205231 S/N : 123456789012 ADJ: ADJ: TYPE: PVI TYPE: PVI B-S/N: B-S/N: Fig. 7-6 Copyright© 1995-2012 SAMSUNG. All rights reserved.
  • Page 53 2. It is recommended that you use an AC adaptor or the fully charged batteries. * Before updating your camera’s firmware, make sure the battery is fully charged. 3. Press the power button to turn on the camera. Power button (Turn on) Fig. 7-7 Copyright© 1995-2012 SAMSUNG. All rights reserved.
  • Page 54 5. The display will show “Firmware is updating...” Firmware is updating... Do not power off during the process. Fig. 7-9 6. Once the firmware update process is complete, the camera will automatically power off. Copyright© 1995-2012 SAMSUNG. All rights reserved.
  • Page 55 7. Install the camera. Turn on the camera. 8. All of the adjustment data will be deleted when forced to quit. Therefore you have to go over all the adjustment process again. Fig. 7-10 Copyright© 1995-2012 SAMSUNG. All rights reserved.
  • Page 56 2) PUNT ADJ (AF) 3) SHUTTER CLOSE TIME ADJ 4) CMOS GAIN ADJ 5) IRIS ADJ (AE) 6) LENS SHADING ADJ (Color Shading) 7) CMOS DEFECT PIXEL ADJ (DPC) 8) FLASH ADJ 9) SERIAL NUMBER WRITING ADJ Copyright© 1995-2012 SAMSUNG. All rights reserved.
  • Page 57 Adjustment data and OK message Adjustment value and OK message are displayed on LCD. are displayed on LCD. Set process ID. (EEPROM) Turn off automatically or continue to proceed the process. Turn off or stand by. <Table 8-2> Copyright© 1995-2012 SAMSUNG. All rights reserved.
  • Page 58 CAUTION Set the camera face up on a stable surface such as a table, desk or floor. Otherwise, it will significantly degrade the performance, generating the noise on Gyro Sensor and Hall Sensor. Copyright© 1995-2012 SAMSUNG. All rights reserved.
  • Page 59 - Set the distance as less than 1cm between the end of camcorder lens and lens surface of the infinity Collimator. - Do not remove the camcorder from tripod during the process. Infinity Collimator Camera Tripod Fig. 8-1 Copyright© 1995-2012 SAMSUNG. All rights reserved.
  • Page 60 4. The adjustment process will automatically begin. <Adjustment result> Double-click the memory card folder to view the result. You will find the generated CSV file in the folder. Click the file to check the generated content. Copyright© 1995-2012 SAMSUNG. All rights reserved.
  • Page 61 Double-click the memory card folder to view the result. You will find the generated CSV file in the folder. Click the file to check the generated content. < Restriction > If the CSV file size is more than 30KB, delete all of the previous data and repeat step 4. Copyright© 1995-2012 SAMSUNG. All rights reserved.
  • Page 62 Double-click the memory card folder to view the result. You will find the generated CSV file in the folder. Click the file to check the generated content. < Restriction > If the CSV file size is more than 30KB, delete all of the previous data and repeat step 4. Copyright© 1995-2012 SAMSUNG. All rights reserved.
  • Page 63 Double-click the memory card folder to view the result. You will find the generated CSV file in the folder. Click the file to check the generated content. < Restriction > If the CSV file size is more than 30KB, delete all of the previous data and repeat step 4. Copyright© 1995-2012 SAMSUNG. All rights reserved.
  • Page 64 Double-click the memory card folder to view the result. You will find the generated CSV file in the folder. Click the file to check the generated content. < Restriction > If the CSV file size is more than 30KB, delete all of the previous data and repeat step 4. Copyright© 1995-2012 SAMSUNG. All rights reserved.
  • Page 65 3) Refer to the CARD WRITE information and write the number of defective cells to the data file. <Adjustment result> Double-click the memory card folder to view the result. You will find the generated CSV file in the folder. Click the file to check the generated content. 8-10 Copyright© 1995-2012 SAMSUNG. All rights reserved.
  • Page 66 Double-click the memory card folder to view the result. You will find the generated CSV file in the folder. Click the file to check the generated content. < Restriction > If the CSV file size is more than 30KB, delete all of the previous data and repeat step 4. Copyright© 1995-2012 SAMSUNG. All rights reserved. 8-11...
  • Page 67 ■ Serial number is provided in the cameras non-volatile memory. A serial number is a 15-digit alphanumeric code indicated on the sticker at the bottom of a camera. ■ It helps to verity the authenticity of Samsung digital camera by checking the 15-digit serial number. CAUTION It is necessary to proceed the serial number writing process after replacing the parts due to the Main PCB failure.
  • Page 68 Shutter button completely FW Version DSC: G206142 OIS : 1205231 FW Version DSC: G206142 S/N : A0013CBH700369C OIS : 1205231 S/N : 123456789012 ADJ: ADJ: TYPE: PVI TYPE: PVI B-S/N: B-S/N: Fig. 8-10 Copyright© 1995-2012 SAMSUNG. All rights reserved. 8-13...
  • Page 69 Exploded view and parts list 9. Exploded view and parts list 9-1 ASSY BODY Parts Service Information Availability Service is available. Service is not available. Parts Parts No. Description Available Remark AD90-05111A ASSY BODY-BK ASSY BODY Copyrightⓒ 1995-2012 SAMSUNG. All rights reserved.
  • Page 70 SCREW-TAPTYPE (M1.4 X L4 / NI) AD63-07160A T/SHEET-CIS PCB AD97-22788A ASSY COVER BACK-EX2F_BK AD63-06266A CUSHION BACK KEY 6001-002281 SCREW-MACHINE (M1.7 X L5 / NI) 6001-002152 SCREW-MACHINE (M1.4 X L4 / BLK) AD61-04096A SPRING HOTSHOE Copyrightⓒ 1995-2012 SAMSUNG. All rights reserved.
  • Page 71 Exploded view and parts list 9-2 ASSY COVER FRONT Parts Parts No. Description Available Remark AD97-22784A ASSY COVER FRONT-BLACK ASSY COVER FRONT Copyrightⓒ 1995-2012 SAMSUNG. All rights reserved.
  • Page 72 AD63-04973A TSHEET AF LED AD63-06959A TSHEET COVER TOP 6003-001717 SCREW-TAPTYPE (M1.4 X L4.5 / BLK) 6001-002152 SCREW-MACHINE (M1.4 X L4 / BLK) AD97-22432A ASSY PLATE ZOOM AD97-22782A ASSY ZOOM RELEASE AD97-22785A ASSY BUTTON POWER Copyrightⓒ 1995-2012 SAMSUNG. All rights reserved.
  • Page 73 Parts No. Description Available Remark ASSY STROBO PCB AD97-22786A ASSY STROBO PCB Loc. No. Parts No. Description Available Remark AD63-06938A COVER CONDENSER AD63-07123A SHEET SMD STROBO AD92-01914A PCB STROBO AD41-01899A F-PCB STROBO 2401-004886 CONDENSER Copyrightⓒ 1995-2012 SAMSUNG. All rights reserved.
  • Page 74 PLATE HOLDER BATTERY AD63-06946A COVER JACK AD61-05725A HINGE JACK DOOR AD63-06944A COVER BATTERY AD63-06945A COVER BATTERY LOCK AD61-05723A PLATE COVER BATTERY 6107-001832 SPRING-TS (BATTERY COVER) AD61-04637A HINGE BATTERY COVER AD97-22787A ASSY COVER BATTERY AD61-05726A HOLDER-TRIPOD Copyrightⓒ 1995-2012 SAMSUNG. All rights reserved.
  • Page 75 Exploded view and parts list 9-5 ASSY COVER TOP Parts Parts No. Description Available Remark ASSY COVER TOP AD97-22792A ASSY COVER TOP_BLACK Copyrightⓒ 1995-2012 SAMSUNG. All rights reserved.
  • Page 76 6003-001630 SCREW-TAPTYPE (M1.4 X L3.5 / BLK) AD97-22790A ASSY TOP F-PCB 3001-002718 SPEAKER AD63-06955A CUSHION MIC 3003-001183 ASSY MIC 6003-001630 SCREW-TAPTYPE (M1.4 X L3.5 / BLK) AD61-05771A SPRING ECT-LINK AD63-06940A COVER-ENCLOSURE AD97-22793A ASSY COVER-TOP_SUB Copyrightⓒ 1995-2012 SAMSUNG. All rights reserved.
  • Page 77 SHAFT HINGE A 6044-001137 E-RING AD61-05679A SHAFT HINGE B 6044-001137 E-RING AD97-17178A ASSY FLASH MODULE 3302-001820 POP-UP MAGNET AD63-06942A COVER POPUP BACK 6003-001660 TAP 1.4*30 NI PLT (H=2.5) AD63-06960A TSHEET COVER STROBO AD63-06943A COVER STROBO Copyrightⓒ 1995-2012 SAMSUNG. All rights reserved.
  • Page 78 Exploded view and parts list 9-7 ASSY COVER BACK Parts Parts No. Description Available Remark ASSY COVER BACK AD97-22788A ASSY COVER BACK-BK 9-10 Copyrightⓒ 1995-2012 SAMSUNG. All rights reserved.
  • Page 79 AD97-22437A ASSY-HINGE AD92-01915A FPCB HINGE EXTEND AD61-05691A MAGNET ROTATION AD63-06754B COVER-HINGE TOP EX2F-BK AD63-06755B COVER-HINGE BOTTOM-EX2F BK AD63-07074A SHEET-MR AD63-06757B COVER-LCD TOP EX2F_BK 6001-002316 SCREW-MACHINE (M1.7 X L4 / BLK) AD63-06921A CUSHION DAMPER 9-11 Copyrightⓒ 1995-2012 SAMSUNG. All rights reserved.
  • Page 80 ASSY PCB KEY AD97-22803A ASSY-HINGE COVER-BK AD97-22437A ASSY HINGE AD92-01915A ASSY PCB KEY AD63-06755B COVER-HINGE BOTTOM AD61-05691A MAGNET-RATATION AD63-06754B COVER-HINGE TOP AD63-07074A SHEET-MR AD63-06757B COVER-LCD TOP 6001-001291 SCREW-MACHINE (M1.7 X L4 / BLK) 9-12 Copyrightⓒ 1995-2012 SAMSUNG. All rights reserved.
  • Page 81 Remark ASSY COVER BACK-SUB AD97-22888A ASSY COVER BACK-SUB Loc. No. Parts No. Description Available Remark AD63-06966A COVER-BACK AD63-04974A T/SHEET-REAR ACCESS AD64-03717A WINDOW-REAR ACCE3SS AD63-07184A CUSHION-DAMPER AD63-06961A T/SHEET-GRIP BACK AD63-06948A COVER-GRIP BACK AD67-02523A RUBBER-LEG 9-13 Copyrightⓒ 1995-2012 SAMSUNG. All rights reserved.
  • Page 82 Loc. No. 29, 30, 31, 32, 33, 34, 35, 37, 42, 45 BASE;D8-EX2 ASSY SUB BARREL-BARREL AD97-22217A Loc. No. 23, 24, 25, 26, 27 BASE;D8-EX2 AD97-22899A ASSY SUB BARREL-COVER Loc. No. 2, 45 9-14 Copyrightⓒ 1995-2012 SAMSUNG. All rights reserved.
  • Page 83 PLATE CMOS HOLDER AD92-01961A ASSY PCB FPC-EX2F_CIS 6003-001630 SCREW-TAPTYPE (M1.4 X L3.5 / BLK 6003-001288 SCREW-TAPTYPE (M1.4 X L2 / BLK) 6003-001633 SCREW-TAPTYPE (M1.4 X L3 / BLK) AD63-07161A T/SHEET-COVER AD63-04521A T/SH EET-SHUTTER 9-15 Copyrightⓒ 1995-2012 SAMSUNG. All rights reserved.
  • Page 84 N.America, S.America https://gspn3.samsungcsportal.com © 2012 SAMSUNG Electronics Co.,Ltd This service manual is a property of Samsung Electronics Co.,Ltd. All rights reserved. Any unauthorized or attempted unauthorized use of this service manuel is strictly prohibited and may be punishable under applicable Printed in Korea July, 2012 international and/or domestic law.