Summary of Contents for Bolton Furniture AVAN30WHBB
Page 1
. Use of power tool to assemble this Tools Required product will invalidate any claim and damage this product making it unsafe !!! . Please assemble on a clean soft (Included) (Not Included) (Not Included) surface to avoid damage. www.boltonfurniture.com 5/6/2022 1 of 9 AVAN30WHBB 30"VANITY...
Page 2
Part list - 30" Vanity Identifying the hardware-Identify the hardware using the illustrations below Ø8*30mm Wood Dowel M6*45mm Bolt Ø6*16mm Washer 3.5*15mm Screw 4*50mm Screw 4*25mm Screw Ø6*20mm Wood Dowel 3.5*12mm Screw 4*25mm Screw 4*40mm Anchor www.boltonfurniture.com 5/6/2022 2 of 9 AVAN30WHBB 30"VANITY...
Page 5
Step 05 M6*45mm Bolt Ø6*16mm Washer Note: Do not tighten bolts firmly at this time Step 06 M6*45mm Bolt Ø6*16mm Washer Note: Tighten all bolts at this time 5/6/2022 5 of 9 AVAN30WHBB 30"VANITY...
Page 9
Make sure the screws align with the Stud in the wall. . If hole locations do not align with stud in wall, install the EZ Anchor(J) in to drywall and then screwing the EZ Anchor in to the drywall. Stud Stud 5/6/2022 9 of 9 AVAN30WHBB 30"VANITY...
Need help?
Do you have a question about the AVAN30WHBB and is the answer not in the manual?
Questions and answers