Advertisement
Quick Links
Advertisement
Related Manuals for Imaging Source 38U Series
Summary of Contents for Imaging Source 38U Series
- Page 1 Operating Instructions Industrial Cameras Operating Instructions 2025-06-27...
- Page 2 © 2025 by The Imaging Source Europe GmbH Überseetor 18 28217 Bremen Germany www.theimagingsource.com Version: 2025-06-27 Translation of original operating instructions Distribution and reproduction of this document, utilization and communication of its contents are prohibited unless expressly permitted. Infringements will result in compensation for damages.
- Page 3 Contents Contents Introduction ..................... 4 About this document ..................4 Technical Reference Manuals ................. 4 Target group ....................4 Warnings in the document ................5 Support ......................5 Safety ....................... 6 Intended use ....................6 Electromagnetic compatibility ................ 6 Safety instructions ..................7 Product description ...................
- Page 4 1 Introduction 1.1 About this document Introduction About this document These operating instructions are valid for all industrial cameras (with housing) manufac- tured by The Imaging Source Europe GmbH. The following series are covered: • USB 3.1: 38U/37U series •...
- Page 5 1 Introduction 1.4 Warning notes in the document Warning notes in the document Warning notes indicate safety-relevant information. If there is a risk to a person or an object, you will find warnings in the "Fehler! Verweis- quelle konnte nicht gefunden werden. " chapter and within action sequences before an action step.
- Page 6 2.1 Intended use Safety Please read the safety instructions in this chapter carefully before installing and using the camera. The Imaging Source Europe GmbH accepts no liability for damage to property or personal injury caused by non-observance or improper handling. Intended use...
- Page 7 2 Safety 2.3 Safety instructions Safety instructions Material damage due to improper use! The camera is not designed for unprotected outdoor use and can be damaged by excessive moisture or wetness. • The camera may only be used indoors. Material damage due to improper installation or incorrect handling of the camera! Improper installation or incorrect handling of the camera can result in damage to the camera.
- Page 8 2.3 Safety instructions Product description The high-quality and robust industrial cameras manufactured by The Imaging Source Eu- rope GmbH are used for image capture in many areas such as automation, monitoring, quality control, logistics, barcode recognition and evaluation and other applications.
- Page 9 Connect the camera as described in the chapter "Installation and commission- ing ". If there is any damage ... Contact the support of The Imaging Source Europe GmbH (see chapter "Support ". Do not connect the camera in this case!
- Page 10 Technical Reference Manual of the respective camera (see "Technical Reference Manuals". The industrial cameras manufactured by The Imaging Source Europe GmbH may only be op- erated with a power supply that meets the system-specific requirements (see USB specifica- tion or PoE specification according to IEEE 802.3af or IEEE 802.3at).
- Page 11 5 Installation and commissioning 5.2 Installation Installation How to mount the camera If necessary, mount the lens depending on the connection type and ensure that it is positioned correctly. Observe the following instructions: • C/CS mount Ensure that the required length of the lens mount is used for the existing lens.
- Page 12 Reference Manual (see "Technical Reference Manuals"). Incorrect wiring can lead to a defect in the electronics. Download the appropriate drivers from The Imaging Source Europe GmbH website and install them. Install the required software, e.g. IC Capture, IC Imaging Control or tiscamera.
- Page 13 Protect the cameras from direct sunlight, moisture and shocks during operation. Operation The industrial cameras from The Imaging Source Europe GmbH are designed for continuous operation. Operating elements The industrial cameras have no operating elements. They are set and operated exclusively via the settings in application programs (e.g.
- Page 14 We cooperate with several qualified recycling companies to create opportunities for the return of old devices. If a device manufactured by the Imaging Source Europe GmbH has reached the end of its useful life and you would like to return it, please contact:...
- Page 15 9 Disposal Data protection notice Waste equipment often contains sensitive personal data. This applies in particular to infor- mation and telecommunications technology devices such as computers and smartphones. In your own interest, please note that each end user is responsible for deleting data on the old devices to be disposed of.
Need help?
Do you have a question about the 38U Series and is the answer not in the manual?
Questions and answers