Yamaha DTX-5000 Quick Connect Manual

Quick-Connect Guide
DTX-5000
Home Theater in a Box
Yamaha created this package to greatly enhance your audio and home theater enjoyment. This Quick-Connect
Guide will help you get started. Follow the steps to assemble and connect the speakers first. Refer to your
Owner's Manuals as well as those that came with your other components for complete instructions and
precautions. Be sure to turn off all power while making connections. You will need the following which are not
included in the package: Phillips screwdriver, wire cutter/stripper, toggle bolts, molly anchor screws or sheet
metal screws.
1
In the
   
Box
   
Inspect Contents After unpacking, inspect the contents to confirm you have the above items:
speakers, three rear speakers, one center speaker,
 
two finishing brackets, RCA cable, one bag each of

bracket and screw, subwoofer, non-skid pads for base,
 
base, audio/video RCA cable, HTR-5750 Receiver with remote,
 
optical cable. Also included, but not shown, are AM and FM antennas and three related Owner's Manuals.
3
Use this size screw

Main Speaker Assembly

Attach Bases to Stands Apply the non-skid pads
inset. Identify both speaker stands and both bases

short screws as shown.

6 7
Connect Main Speaker
Wire For illustration purposes,
stand, which is now attached to
speaker, is not shown in diagram
above. Locate screw-type input
terminals at the rear of each of
the speakers. Connect the speaker
wire as shown. The positive (+)
side of the wire with the white
stripe attaches to the red terminal.
The negative (-) side attaches to
the black terminal. (Please see
your NS-FP9500 Owner's Manual
for more detailed instructions
on speaker wire connections.)
Place assembled main speakers in
desired location to the left and
right of the viewing/audio source.
(See Step 2, Room Layout.)
NOTE Banana plug connectors
(not included) can be used to
connect speaker wire to speaker
terminals. Please see your Owner's
Manual for directions.






(8)


speaker wire, two bases, two speaker stands,
  
long screws (8) and short screws (4), center speaker
  
non-skid pads for stands, cable protection seal for
 
and DV-S5770 DVD Player with remote, and

4
as shown in the

and attach using

Rear
Speakers
16 7 / "
32
7
16 / 32 "

Mount Rear Speakers and Rear Center Speaker (Optional)

Fasten mounting screws into a firm wall or wall support as shown. Hang
the keyholes on the back of the each of the speakers
screws. Attach speaker wire as shown in Step 6.
WARNING If you are unsure of how to securely and safely fasten
speakers to a wall, please contact a reliable source about the best type of
hardware for your particular wall's construction. Secure installation is the
purchaser's responsibility. See Owner's Manual for additional instructions
and precautions.
���� �������
2

Room Layout



(2)
(4)
two main


Thread 5
Speaker Wires
Cut speaker wire
to appropriate

lengths for
all speaker
connections and
set aside. Place
each long stand
upright on its
base. Thread
main speaker
wire through
oval opening on
stand and pull
through opening
on underside of
base. Pull wire all
the way through
leaving extra
length near oval
opening as shown.
Apply non-skid
pads on stands.

8
TYPICAL
3
1 / 4 "
For mounting
screws, use
minimum
3 "
1 / tapping
4
screw (not
included).
1 "
Leave / space
4
between screw
head and wall.

Attach Finishing Brackets

on top of two speaker stands.

10
on the protruding

HTR-5750 Receiver

Receiver Connections

Connect Speakers Positive (+) side of the wire with
white stripe attaches to (+) terminal. Negative (-) side
attaches to (-) terminal.
CAUTION Receiver must not be plugged in while
connecting speakers.
��� ���
Speaker Placement After assembly of the speakers place them so they appear in the
approximate positions as shown in the diagram above.
9
Center Speaker Assembly
Attach Bracket and Speaker Wire Attach bracket
center speaker using supplied screw as shown. Attach speaker

wire as shown in Step 6.
FRONT
Right Left
Attach Main
Speakers Lay stands
down. Line up holes
so that oval opening
Use this size screw
is near speaker wire
connections on speaker.
Attach main speakers
using long screws as
shown. Attach cable
protection seal to

base as shown in inset.
Speaker
Wire
to

CENTER SURROUND SURROUND
BACK Right Left