Locate The Wire Hole - Fishman AG-094 Installation Manual

1. Rout a .125" (3.2 mm) or .094 (2.3 mm)
wide saddle slot.
2. Be certain that the bottom of the slot is
FLAT. Deepen an existing slot just
enough to obtain a clean, flat surface.
II • Locate the Wire Hole
The location of the wire hole is critical to the performance to the AG-125 / AG-094
as it determines the correct position of the piezo elements relative the strings.
1. Locate the center of the wire hole .234" (5.9 mm) from the closest outside string.
(Or center of the closest pair of outside strings for 12-string models.)
2. Mark the location where the wire will enter the saddle slot. Center the mark
between the walls (width) of the slot. Drill a .09375"(2.4mm) hole.
3. Clear wood chips and foreign materials from the saddle slot
4. Carefully insert the pickup. The wire must slip easily into the wire hole. The pick-
up must fit into the slot without friction or binding.
.234"
(5.9 mm)
.234"
(5.9 mm)
I n s t a l l a t i o n G u i d e
I n s t a l l a t i o n G u i d e
5
5