Materials And Basic Tools Needed - Maytag HVN41250P User Manual

MATERIALS AND BASIC TOOLS NEEDED

Accessories
To simplify the installation Maytag has available the installation parts shown below. You may or may not need all of these accessories depending on
your type of installation. Call Maytag Customer Service at 1-800-788-8899 for an authorized installer.
EXPANSION TANKS FOR THERMAL EXPANSION CONDITIONS
AVAILABLE IN 2 GALLONS (7.6 LITERS), Part No. 66001013 AND 5
GALLONS (18.9 LITERS), Part No. 66001014 CAPACITY.
Tools
You may or may not need all these tools, depending on your type of
installation. These tools can be purchased at your local hardware store.
• Pipe Wrenches (2) 14" (356 mm)
• Screwdriver
• Tin Snips
• 6' (1.82 m) Tape or Folding Ruler
• Garden Hose
• Drill
• Pipe Dope or Teflon Tape
SLOT-HEAD SCREWDRIVER
PHILLIPS SCREWDRIVER
ROLL OF TEFLON
TAPE (USE ONLY ON
WATER HEATER
CONNECTIONS)
6 FOOT TAPE
GARDEN HOSE
DRILL
TIN SNIPS
PIPE DOPE
(SQUEEZE TUBE)
USE FOR WATER AND GAS
CONNECTIONS
PIPE WRENCH
DRAIN PANS AVAILABLE IN 22" (559 mm) DIAMETER (PART NO.
66001011) FOR WATER HEATERS HAVING A DIAMETER 20" (508
mm) OR LESS, 24" (610mm) DIAMETER (PART NO. 66001105) FOR
WATER HEATERS HAVING A DIAMETER 22" (559 mm) OR LESS AND
28" (711 mm) DIAMETER (PART NO. 66001012) FOR WATER HEATERS
HAVING A DIAMETER 26" (660 mm) OR LESS.
Additional Tools Needed
When Sweat Soldering
• Tubing Cutters or Hacksaw
• Propane Torch
• Soft Solder
• Solder Flux
• Emery Cloth
• Wire Brushes
TUBING CUTTER
HACKSAW
3/4" (19 mm) WIRE BRUSH
1/2" (13 mm) WIRE BRUSH
7
PROPANE
TORCH
ROLL OF
EMERY CLOTH
ROLL OF LEAD-FREE SOLDER
FLUX
SOFT SOLDER