Advanced Bios Features - JETWAY S755MAXR1A User Manual

Time
The time format is <hour><minute><second>.
Primary Master/Primary Slave
Secondary Master/Secondary Slave
Press PgUp/<+> or PgDn/< – > to select Manual, None, Auto type. Note that the specifications
of your drive must match with the drive table. The hard disk will not work properly if you
enter improper information for this category. If your hard disk drive type is not matched or
listed, you can use Manual to define your own drive type manually.
If you select Manual, related information is asked to be entered to the following items. Enter
the information directly from the keyboard. This information should be provided in the
documentation from your hard disk vendor or the system manufacturer.
If the controller of HDD interface is SCSI, the selection shall be "None".
If the controller of HDD interface is CD-ROM, the selection shall be "None"
Access Mode The settings are Auto Normal, Large, and LBA.
number of cylinders
Cylinder
Head number of heads
write precomp
Precomp
Landing Zone landing zone
number of sectors
Sector

3-5 Advanced BIOS Features

CMOS Setup Utility – Copyright(C) 1984-2003 Award Software
Anti-Virus Protection
Cooling Sprite
CPU L1 & L2 Cache
Quick Power On Self Test
SiS-SATA, SCSI Boot Order
First Boot Device
Second Boot Device
Third Boot Device
Boot other Device
Swap Floppy Drive
Boot Up Floppy Seek
Boot Up NumLock Status
Gate A20 Option
Typematic Rate Setting
Typematic Rate (Chars/Sec)
Typematic Delay (Msec)
Security Option
APIC Mode
MPS Version Control For OS
OS Select For DRAM > 64MB
↑ ↓ → ←
Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit
F5:Previous Values
Advanced BIOS Features
Disabled
Disabled
Enabled
Enabled
SATA,SCSI
Floppy
HDD 0
CDROM
Enabled
Disabled
Enabled
On
Fast
Disabled
6
250
Setup
Disabled
1.4
Non-OS2
F6:Optimized Defaults
22
Item Help
Menu Level >
F1:General Help
F7:Standard Defaults