Installing The External Ati Graphics Card - JETWAY A353DMSR1A User Manual

5-3 Installing the External ATI Graphics Card

AGP Slot on Motherboard
1 Power-off the computer and monitor, and then disconnect the monitor cable from the
back of your computer.
2 Remove the computer cover. If necessary, consult your computer's manual for help in
removing the cover.
3 After locating the AGP slot, and if necessary, removing the metal cover, align your ATI
graphics card with the slot, and then press it in firmly until the card is fully seated.
4 Replace the screw to fasten the card in place, and then replace the computer cover.
5 Connect one display to the motherboard's internal graphics connector A, and then
connect the other two displays to the external graphics card monitor connectors B and
C.
Monitor Connectors on back of computer
46