Table of Contents
Advertisement
Connecting the Display to your Computer
Using the VGA cable
Power off your computer.
1.
Connect one end of the VGA signal cable to the LCD
2.
Monitor's VGA port. (See Fig 1-3)
Connect the other end of the signal cable to the VGA
3.
port on your PC.
Make sure connections are secure.
4.
Connecting the AC Power
Connect the power cord to the monitor. (See Fig. 1-4)
1.
Connect the power cord to an AC power source.
2.
Instructions for VESA Mounting
To detach the LCD Monitor from its stand, unscrew the
two screws
for the monitor stand and pull it downwards
to remove, then unscrew the four screws
monitor stand bracket and pull this down to remove.
Interface for Arm Applications
Before installing the mounting device, please refer to
Fig.1-7.
The rear of this LCD display has four integrated 4 mm, 0.7
pitch threaded nuts, as well as four 5mm access holes in
the plastic covering as illustrated in Figure 1-2. (These
specifications meet the VESA Flat Panel Monitor Physical
Mounting Interface Standard).
for the
6 6
Figure 1-3
Figure 1-4
Figure 1-6
Figure 1-7
Advertisement
Table of Contents
