JETWAY 845LDA1A User Manual page 19

These headers are used for connecting the additional USB port plug. By attaching an
option USB cable, your can be provided with two additional USB plugs affixed to the
back panel.
(4) IDE Activity LED: IDE LED
This connector connects to the hard disk activity indicator light on the case.
(5) Turbo LED switch: TURBO LED
Since the motherboard's turbo function is always on. The turbo LED will remain constantly
on while the system power is on. You may wish to connect the Power LED from the
system case to this lead. See the figure below.
(6) Reset switch lead: RESET
This 2-pin connector connects to the case-mounted reset switch for rebooting your
computer without having to turn off your power switch. This is a preferred method of
rebooting in order to prolong the lift of the system's power supply. See the figure below.
(7) Speaker connector: SPEAK
This 4-pin connector connects to the case-mounted speaker. See the figure below.
(8) Power LED: PWR-LED
The Power LED is light on while the system power is on. Connect the Power LED from
the system case to this pin.
(9) Power switch: PWR BTN
This 2-pin connector connects to the case-mounted power switch to power ON/OFF the
system.
(10) Wake On-LAN Headers (3-pin) : WOL
USB3
Pin 1
USB Port Headers
Pin 1
FP
Pin 1
System Case Connections
16
USB2
Pin 1
SPEAK