Table of Contents
Advertisement
Check your package and there is A MAGIC INSTALL CD included. This CD consists of all
DRIVERS you need and some free application programs and utility programs. In addition, this
CD also include an auto detect software which can tell you which hardware is installed, and
which DRIVERS needed so that your system can function properly. We call this auto detect
software MAGIC INSTALL.
MAGIC INSTALL Supports WINDOWS 98SE/ME/NT4.0/2000/XP
Insert CD into your CD-ROM drive and the MAGIC INSTALL Menu should appear as below.
If the menu does not appear, double-click MY COMPUTER / double-click CD-ROM drive or
click START / click RUN / type X:\SETUP.EXE (assuming X is your CD-ROM drive).
From MAGIC INSTALL MENU you may make 11 selections:
1. INF
2. IAA
3. VGA
4. SOUND
5. LAN
6. PC-HEALTH
7. MAGIC BIOS
8. DIRECTX8
9. PC-CILLIN
10. BROWSE CD
11. EXIT
4-1 INF
install INTEL 845 chipset system driver
After you have completed the installation of your operation system (WINDOWS 98SE). You will find
an UNKNOWN DEVICE in the device manager (START/SETTING/CONTROL PANEL/
SYSTEM/DEVICE MANAGER). You have to install INF driver as shown below:
install Intel 845 chipset system driver
install Intel Application Accelerator software
install Intel 845G VGA driver
(Only for 845GEA/845GEAL/845GPro/845GProL)
install CMI9738 Audio Codec driver
install RT8100 LAN Controller driver
(Only for 845GProL/845GEAL/845PEAL)
install Intel 845 PC-HEALTH monitor
install BIOS Live Update Utility
install Microsoft DirectX 8.1 driver
install PC-CILLIN2002 anti-virus program
to browse the contents of the CD
to exit from MAGIC INSTALL menu
35
Advertisement
Table of Contents
