Power Management Setup - JETWAY 845GDMR1A User Manual

M/b for socket 478 pentium 4 processor

Hide thumbs

Table Of Contents

Table of Contents

ACPI Function

Power Management

Video Off Option

Video off Method

Video Off In Suspend

Suspend Type

MODEM Use IRQ

Suspend Mode

HDD Power Down

Soft-off by PWR-BTTN

Wake-Up by PCI card

Power On by Ring

Resume by Alarm

X Date (of Month)

X Time (hh:mm:ss)

CPU Thermal Management Timer

> PM Timer Reload Events

↑↓→← Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit

F5:Previous Values

ACPI Function

This item allows you to Enabled/Disabled the Advanced Configuration and Power Management (ACPI).

The settings are Enabled and Disabled.

Video Off in Suspend

This determines the manner in which the monitor is blanked. The choice are Yes → Video will off ,

and No→ Video always On.

Video Off Method

This determines the manner in which the monitor is blanked.

DPMS (default)

Blank Screen

V/H SYNC+Blank

Modem Use IRQ

This determines the IRQ in which the MODEM can use.

The settings are: 3, 4, 5, 7, 9, 10, 11, NA.

Power Button Function

Pressing the power button for more than 4 seconds forces the system to enter the Soft-Off state. The

settings are: Delay 4 Sec, Instant-Off.

Wake-Up by PCI card /Power On by Ring

During Disabled, the system will ignore any incoming call from the PCI card/modem. During Enabled,

the system will boot up if there's an incoming call from the PCI card /modem.

Wake-Up on RTC Alarm

This function is for setting date and time for your computer to boot up. During Disabled, you cannot

use this function. During Enabled, choose the Date and Time Alarm:

Date(of month) Alarm

You can choose which month the system will boot up. Set to 0, to boot every day.

Time(hh:mm:ss) Alarm

You can choose what hour, minute and second the system will boot up.

Note:

If you have change the setting, you must let the system boot up until it goes to the