Starting Up Your Computer - JETWAY 845GDMR1A User Manual

(11) IR infrared module Headers (5-pin) : IR
This connector supports the optional wireless transmitting and receiving infrared
module. You must configure the setting through the BIOS setup to use the IR function.
(12) CD Audio-In Headers (4-pin) : CDIN
CDIN are the connectors for CD-Audio Input signal. Please connect it to CD-ROM
CD-Audio output connector.

2-7 Starting Up Your Computer

1. After all connection are made, close your computer case cover.
2. Be sure all the switch are off, and check that the power supply input voltage is set to
proper position, usually in-put voltage is 220V∼240V or 110V∼120V depending on your
country's voltage used.
3. Connect the power supply cord into the power supply located on the back of your system
case according to your system user's manual.
IR
2 6
Pin 1 5
IR infrared module Headers
C DIN
4
1
CD Audio-In Headers
18