Table of Contents
Advertisement
(3) ATX P6 Power Connector (6-pin block) : ATXP6
This is a new defined 6-pins connector that usually comes with ATX Power Supply. The
ATX Power Supply which fully support Pentium 4 processor must including this
connector for support extra 3.3V and 5V voltage to maintain system power consumption.
Without this connector might cause system unstable because the power supply can not
provide sufficient current for system.
(4)
PS/2 Mouse & PS/2 Keyboard Connector: J1 (PS2 KB/MOUSE)
The connectors for PS/2 keyboard and PS/2 Mouse.
(5)
USB Port connector: J2 (USB)
The connectors are 4-pin connector that connect USB devices to the system board.
(6)
LAN Port connector: LAN (Only for 845DBAL)
This connector is standard RJ45 connector for Network connector.
(7)
Parallel Port Connector (25-pin female): PARALLEL
Parallel Port connector is a 25-pin D-Subminiature Receptacle connector. The On-
board Parallel Port can be disabled through the BIOS SETUP. Please refer to Chapter 3
"INTEGRATED PERIPHERALS SETUP" section for more detail information.
Audio and Game Connector : AUD _ GAME
(8)
This Connector are 3 phone Jack for LINE-OUT, LINE-IN, MIC and a 15-pin
D-Subminiature Receptacle Connector for joystick/MIDI Device.
Pin 1
GND
GND
GND
3.3V
3.3V
5V
Power Connector on Motherboard
14
BLK
BLK
BLK
ORG
ORG
RED
Power Plugs from Power Supply
Advertisement
Table of Contents
