BYD Seal 07 DM-i Manual
  1. Manuals
  2. Brands
  3. BYD Manuals
  4. Automobile
  5. Seal 07 DM-i
  6. Manual
BYD Seal 07 DM-i Manual

BYD Seal 07 DM-i Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Thank you for choosing BYD. To better use and maintain the vehicle, please read this
manual carefully and keep it for future reference.
Special instructions: BYD Auto Industry Co., Ltd. recommends that you choose genuine
spare parts and use, maintain, and repair the vehicle in accordance with this manual.
The use of non-genuine spare parts to replace or modify the vehicle will affect the
performance of the entire vehicle, especially its safety and durability. Vehicle damage
and performance issues caused thereby will not be covered by the warranty. In addition,
vehicle modifications may also violate national laws and regulations and local government
regulations.
Thank you for choosing BYD. Your valuable comments and suggestions are welcome. To
enjoy better services, please provide your accurate contact information. If there is any
change to the information, contact a BYD authorized dealer or service provider in a timely
manner to update the information in the system. You are also advised to pay attention to
the relevant national laws and regulations and local policies, and register the vehicle as
soon as possible; otherwise vehicle registration may fail.
The descriptions marked with the asterisk (*) in this manual are specific to only some
model configurations, and applicable only when the vehicle has these configurations. If
there is any difference with the vehicle you purchased, the configuration of the actual
vehicle shall prevail.
Pay attention to the "REMINDER", "CAUTION" and "WARNING" symbols in this manual, and
follow the instructions carefully to avoid injury or damage. These symbols are defined as
follows:
REMINDER
Items that must be observed to facilitate maintenance.
CAUTION
Items that must be observed to avoid damage to the vehicle.
WARNING
Items that must be observed to ensure personal safety.
is a safety mark to indicate an operation that should not be performed or an event that
should not happen.
Foreword
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Seal 07 DM-i and is the answer not in the manual?

Questions and answers

Related Manuals for BYD Seal 07 DM-i

Summary of Contents for BYD Seal 07 DM-i

  • Page 1 Foreword Thank you for choosing BYD. To better use and maintain the vehicle, please read this manual carefully and keep it for future reference. Special instructions: BYD Auto Industry Co., Ltd. recommends that you choose genuine spare parts and use, maintain, and repair the vehicle in accordance with this manual.
  • Page 2 (if any) related to this product, or consult the dealer who sold the product to you. Copyright BYD Auto Industry Co., Ltd. All rights reserved. © No part of this document may be reproduced, copied, stored, translated, or transmitted electronically or in any other form without prior written consent and authorization of BYD Auto Industry Co., Ltd.

  • Page 3: Table Of Contents

    Illustration Index Instrument Cluster Indicators....37 Exterior..........7 Controller Operation Dashboard......... 8 Doors and Keys.........48 Center Console........9 Keys............48 Doors..........10 Locking/Unlocking Doors....... 52 Smart Access and Start System....59 Safety Electronic Child Protection Lock.... 61 Seat Belts.........12 Seats..........62 Seat Belt Overview........12 Seat Precautions........
  • Page 4 Risk of Carbon Monoxide (CO) Navigation Bar........149 Poisoning..........104 Gestures and Responses....... 149 Wading into Water......... 104 OTA Updates*.........149 Fire Prevention........105 BYD Assistant......... 150 Starting and Driving......107 Bluetooth Call........150 Starting the Vehicle....... 107 Audio*............ 150 Driving............109 File Management........151 Gear Shift Controls........
  • Page 5 Account Registration......162 Engine............ 186 Vehicle Condition and Control....163 Coolant System........187 Individual Center and Vehicle Braking System........187 Management..........163 Windshield Washer........188 Storage.......... 163 Fuel Filter..........188 Glove Box..........163 A/C System..........188 Center Console Storage Wiper Blade Maintenance..... 189 Compartment........164 Tires............

  • Page 7: Illustration Index

    Illustration Index Exterior P190 Trunk Lid Tires P103 P200 Carrying Luggage If a Tire Goes Flat Using Mode 2 Charging Cable Combination Lights P185 Using AC Charging Piles Hood P187 Power Side Mirrors Coolant System P100 P187 Fuel Door Braking System P188 Doors Washer...

  • Page 8: Dashboard

    Dashboard P111 Instrument Cluster Parking Gear P148 P107 Infotainment Touchscreen START/STOP Button P163 Glove Box Hazard Warning Light Switch P162 Vents 10 Steering Wheel P111 Gear Shift Controls 11 Wiper Switch P157 A/C Buttons...

  • Page 9: Center Console

    Center Console Light Switches Using Seat Belts P168 Wireless Phone Charger Working Mode P165 P166 Cup Holder USB Ports P164 Center Console Cubby...

  • Page 10: Doors

    Doors Interior Door Handle Emergency Vehicle Locking with Mechanical Key Power Window Switches Interior Trunk Open Switch Central Locking P164 Door Bins Side Mirror Adjustment Buttons...

  • Page 11: Safety

    SAFETY Seat Belts.......... 12 Airbags..........15 Child Restraint Systems....21 Dual-Mode System Working Mode...25 Anti-theft Alarm System....30 Data Collection and Processing..30...

  • Page 12: Seat Belts

    Until then, do not use the injury to the occupant due to an excessive corresponding seat. restraint force. BYD highly emphasizes that all ● occupants should always fasten their Using Seat Belts seat belts to avoid personal injury or death in an accident.
  • Page 13 WARNING The shoulder belt should cross ● the center of the shoulder, far from the neck and not liable to slip from the shoulder. This helps the seat belt function well in the event of emergency braking or accident, without causing severe injury itself.
  • Page 14 ● is not fastened. After an accident, have the seat ● Display of unfastened seat belt belts checked at a BYD authorized ● dealer or service provider. Seat The indicator for the seat with ● belts with pretensioner function unfastened seat belt lights up on the activated must b replaced.

  • Page 15: Airbags

    (SRS) did not lock the seat belt, contact and also a supplement to seats a BYD authorized dealer or service and seat belts. When the vehicle is provider for inspection as soon as involved in a serious collision and the...

  • Page 16: Airbag Types

    WARNING WARNING If the vehicle is exposed to water airbags may deploy, resulting in ● (wet carpet or vehicle submerged serious injury or death. in water) or damaged by water, do not start the vehicle and Airbag Types the low-voltage battery needs to be disconnected.

  • Page 17: Knee Airbags

    When there is a frontal crash, the seat front impact during vehicle travel and the ● belt secures the occupant's lower body triggering conditions are met, the knee and torso in place. The airbag cushions airbag will deploy to help protect the legs and protects the occupant's head and and knees of occupants.

  • Page 18: Airbag Triggering Conditions And Precautions

    ④ The vehicle rolls over. ECU, the airbag system will not be triggered even if the vehicle is seriously deformed in the accident. The ECU of the BYD airbag system ● has been set up with considerations of common misuse and road conditions.
  • Page 19 ⑤ The vehicle hits a wall or a vehicle at a WARNING side other than the front side. in motion. If the seat belt is ⑥ Parts other than the passenger not fastened, or if the occupant compartment receive side impact. is leaning forward or sitting ⑦...
  • Page 20 It is recommended to contact a BYD Do not change any component ● authorized dealer or service provider of the airbag system, including immediately if any of the following any corresponding label.

  • Page 21: Child Restraint Systems

    and C-pillar are scratched, cracked, or damaged similarly. Child Restraint Systems Child Restraint Systems The airbag cover (highlighted area ● Child restraint systems provide good shown) has been scratched, cracked or protection to your child in an accident. otherwise damaged. For the child's safety, please carefully read the instructions provided with the child restraint and in this manual before...
  • Page 22 Installing Child Restraint Systems The child restraint is the correct type ● and size for the child using it. Precautions The child restraint system is the correct ● type and size for the seating position. ① Do not turn the anchorage lever trim cover inward.
  • Page 23 ② Snap hook WARNING ③ Anchor support When using the lower anchoring ● device, make sure that no foreign objects are around the anchoring device and that the seat belt is not stuck behind the child restraint; make sure that the child restraint is securely fixed.
  • Page 24 When the top tether is used on a ⑤ Rear right seat ● outboard rear seat, route it at the outside of each head post. For more installation instructions, ● please read the instructions provided with your child restraint system. Details on child restraint system installation: ①...

  • Page 25: Dual-Mode System Working Mode

    Seating Position Type (F2X/F2/F3/N Largest suitable booster B2/B3 B2/B3 fixture (B2/B3/No) If needed, the head support can be adjusted or even removed. The front seats can be adjusted to ensure your child is not in contact with front seats. Dual-Mode System REMINDER Working Mode The vehicle may switch to...

  • Page 26: Selecting Working Mode Of Dual-Mode System

    In HEV mode, when low SOC or ● high power is required, the engine starts and operates in series for better dynamic. In HEV mode, the engine generates ● electricity for battery charging and motor working. In HEV mode, the engine drives the ●...
  • Page 27 vehicle is in HEV mode. Toggle the "MODE" button continuously until the ECO indicator lights up on the instrument cluster, indicating that the vehicle is in ECO mode to provide the best fuel economy. HEV-NORMAL drive mode: Toggle the "HEV" button backward. ●...
  • Page 28 If the temperature is lower than-35 contact a BYD authorized dealer ● ℃ or higher than 60 ℃, the vehicle or service provider to avoid the cannot be discharged.
  • Page 29 When the vehicle powers up or ● please pay attention. down, the sound of the high voltage component (the sound of contactor It is recommended to consult a BYD engagement or disengagement) may ● be heard under the auxiliary authorized dealer or service provider for vehicle repair or maintenance.

  • Page 30: Anti-Theft Alarm System

    Triggering the alarm personal data is collected and The system, when armed, will raise an processed when you use a BYD vehicle. ● alarm* with flashing turn signals in any For a more detailed overview on of the following situations: ●...
  • Page 31 In addition to the vehicle on-doard diagnostics interface, for manufacturer, third-party agencies example, by a BYD authorized dealer or with professional equipment (such as service provider or other third parties. government agencies) can also read...
  • Page 32 BYD services through the vehicle's infotainment system network Other devices. Infotainment system BYD is not liable for any such services ● Depending on vehicle configuration, provided by any other party. ● data can be added to the infotainment...
  • Page 33 IFC, and in others, OFC is strictly If required by law, BYD may also be restricted to dashcam purposes). ● obliged to disclose data upon request...
  • Page 34 personal data about another person, or if we are legally prevented from disclosing that information. In some cases, this may mean that ● we can retain the data even if you withdraw your consent.

  • Page 35: Instrument Cluster

    INSTRUMENT CLUSTER Instrument Cluster......36...

  • Page 36: Instrument Cluster

    Instrument Cluster Instrument Cluster Power meter Direction Time Speedometer Dynamic mode Total mileage Gear status Fuel gauge Driving mode OK indicator Outside temperature State of charge (SOC) Instrument cluster view in simple mode...

  • Page 37: Instrument Cluster Indicators

    BYD instrument cluster system. In this authorized dealer or service mode, the instrument cluster provider for inspection.
  • Page 38 Cruise control main indicator* ACC status indicator* ICC indicator* LDA indicator* BSD indicator* AEB indicator* HMA indicator* EV Indicator High beam indicator AVH standby indicator High-voltage battery low SOC Rear fog light indicator warning light GPF regeneration fault AEB fault warning light* indicator* Driving power limit warning Smart key warning light...
  • Page 39 If still on, it is recommended to drive the on at any other time, it indicates vehicle to a BYD authorized dealer or that a certain control system of the service provider for inspection as soon vehicle may be faulty.
  • Page 40 ABS fault warning light If the indicator lights up frequently, ● it is recommended to contact a BYD This warning light comes on when the authorized dealer or service provider ● ignition is on. If the anti-lock braking...
  • Page 41 In that case, contact a BYD authorized corresponding tire is leaking rapidly. dealer or service provider for vehicle inspection as soon as possible.
  • Page 42 When the power of the vehicle is briefly during operation does not ● limited, this warning light will come indicate a problem. on. In this case, contact a BYD authorized dealer or service provider If the ESC warning light remains ● in time.
  • Page 43 In that case, contact a BYD authorized When the steering system is faulty, ● dealer or service provider in time. this warning light is steady on. It is recommended to contact a BYD When the ignition is switched on, this authorized dealer or service provider ●...
  • Page 44 In that case, contact a BYD authorized When the engine is accelerating dealer or service provider for vehicle gradually, if this indicator goes out, the inspection as soon as possible.
  • Page 45 In such case, decreases, and the GPF indicator is it is recommended to contact a BYD solid yellow. At this time, contact a BYD authorized dealer or service provider authorized dealer or service provider for vehicle inspection as soon as for inspection.
  • Page 46 BYD authorized dealer or service provider. The solenoid valve is cleaning, please park Solenoid valve is cleaning, and wait. If the malfunction exists for a long please wait time, it is recommended to contact a BYD authorized dealer or service provider.

  • Page 47: Controller Operation

    CONTROLLER OPERATION Doors and Keys......... 48 Seats..........62 Steering Wheel........65 Wipers..........69 Mirrors..........71 Switches..........72...

  • Page 48: Doors And Keys

    The button (coin) battery in the ● You can register a spare key for smart key is hazardous and both ● the same vehicle. In this case, new and used batteries are to be contact a BYD authorized dealer or service provider immediately.
  • Page 49 It or defibrillators, those who is recommended to contact a use other electronic medical BYD authorized dealer or service devices should also consult the provider for battery change. manufacturer on the use of such devices under the influence If you lose your smart key, it ●...
  • Page 50 You can download and install the in case of dense vehicles. ● latest BYD App in the app market. The There are a few mobile phones function of Bluetooth digital key can be ●...
  • Page 51 Via the BYD app: smartphone or wearable device before ● using the NFC digital key. Here is how to Download and log into the BYD app use: ● in the APP store. Tap Digital Key to enable the function according to the To unlock or lock the vehicle, ●...

  • Page 52: Locking/Unlocking Doors

    With a valid smart key inside the ● vehicle, go to the infotainment touchscreen → → Locks → Locks → Digital Key. Tap the key to be removed and operate as prompted. Via the Wallet app: ● Open the Wallet app on the phone, ●...
  • Page 53 the lock button to lock all the doors. The hidden door handles fold automatically. If the vehicle is shut down, the side mirrors will fold (when the Auto-Fold is enabled) with turn signals flashing once. If the ignition has not been switched off, the side mirrors will not fold, the turn signals will not flash, and the alarm will sound once.
  • Page 54 doors will relock automatically and the key, then all doors lock at the same four door handles retract. time. The hidden door handles fold automatically. If the vehicle is shut down, the side mirrors will fold (when Finding the Vehicle with Smart Key the Auto-Fold is enabled) with turn signals flashing once.
  • Page 55 With the vehicle locked, press the rear ● REMINDER microswitch while carrying a valid key to unlock the trunk. If the electronic smart key is too ● With the vehicle unlocked, press the close to an exterior door handle or ●...
  • Page 56 Reconnecting the low-voltage battery Close the trunk manually to ensure the ● power trunk lid functions normally. WARNING In order to prevent serious injury ● and even death, make sure to observe the following precautions when operating the trunk: ② Vehicle lock button* Never deliberately activate the ●...
  • Page 57 WARNING WARNING or closing the trunk on slopes Otherwise, you may be burned by is more difficult than on level the exhaust system. ground. Be mindful of the Make sure to stand steadily on the possibility of the lid to move ●...
  • Page 58 emergency unlocking mechanism on driver's side mirror. Then all doors are the left side of the trunk. You can open unlocked at the same time. The turn the lid cover in the car by pulling up signals flash twice. the mechanical opening handle on the The locking/unlocking function is left side of the trunk.

  • Page 59: Smart Access And Start System

    Press the START/STOP button to switch ● the ignition off. Then, all doors are unlocked automatically. Locking/unlocking all doors concurrently When the vehicle is not in anti-theft ● mode, the backlight of the central locking button turns on if the vehicle is locked and turns off if the vehicle is unlocked.
  • Page 60 REMINDER If the electronic smart key is too ● close to a door handle or window, it may not be possible to activate the entry function. Start-up With the smart key inside, press the brake pedal and the START/STOP button to start CAUTION P107 the vehicle (see...

  • Page 61: Electronic Child Protection Lock

    If the smart access and start system ● cannot work properly due to system failures, bring all smart keys to a BYD authorized dealer or service provider for repair. To activate child protection locks, press the child protection lock button ① or Saving battery power ②.

  • Page 62: Seats

    WARNING WARNING also prevents a door from being locking mechanism, causing the opened accidentally. seat to move suddenly. After the child protection lock When adjusting the seat, do not ● ● is locked, doors cannot be place your hand under the seat or opened from inside the vehicle, near its operating parts to prevent and the window switch for the...

  • Page 63: Adjusting Front Seats

    Adjusting Front Seats REMINDER Adjusting Front Seats with Power Releasing the switch stops the ● seat in the set position. Do not place anything under the seat as Power front seat adjustments allow you this may prevent the seat from to adjust seatback recline, seat position, operating.

  • Page 64: Adjusting Head Supports

    Removing a head support CAUTION Press and hold the head support Fold or unfold the rear seats adjustment button, remove the head ● at a moderate speed. Avoid support and release the button. quickly lowering or pulling up Installing a head support seatbacks to prevent damage to or malfunction of rear seats and Insert the head support post into...

  • Page 65: Steering Wheel

    Steering Wheel Steering Wheel Switches Configuration 1 Cruise control cancellation Scroll button Rocker switch Right Cruise control Instrument cluster/Back Custom Call Around View Monitoring (AVM) Speech recognition Driving information Left Configuration 2...
  • Page 66 Distance - Scroll button Rocker switch Right Distance + Instrument cluster/Back Call Around View Monitoring (AVM) Speech recognition Driving information Left Left-hand buttons Cruise control* Cruise control cancellation* Turns the cruise control system on or ● off. Changes the ACC mode from active to ●...
  • Page 67 Driving information Roll the button upward to select the ● upper level-2 or level-3 menu items. Press to cycle through the driving ● information interfaces, and press and Roll the button downward to select ● hold to clear the relevant driving the lower level-2 or level-3 menu information.

  • Page 68: Adjusting The Steering Wheel

    Press a second time to exit speech Press the button to switch to ● ● recognition. level-1 menu and its submenus on the left. Horn Press the button to switch to ● Press the horn button area to honk the ●...

  • Page 69: Wipers

    : Point-wiping (Pull down the lever REMINDER ● from to wipe at a low speed until Never adjust the steering wheel you release the lever). ● while driving, as this is under risk of impaired vehicle control, which can lead to accidents. After adjusting the steering wheel, ●...

  • Page 70: Replacing Wiper Blades

    CAUTION conditions to stay safe on the road. REMINDER It is not recommended to pull ● back and hold the wiper switch lever for a long time to keep the Front windshield wipers and washer washer spraying water, which will quickly run out of washer fluid.

  • Page 71: Mirrors

    3. Hold the wiper blade and pull it out along the indicated direction. 4. When installing a new wiper blade, follow the reverse procedure. Manual Anti-glare Rearview Mirror* The mirror has two working modes: normal and anti-glare. Normal mode: Rotate the control lever ●...

  • Page 72: Side Mirrors

    Fold switch : folds or unfolds both WARNING ● side mirrors. Adjust the rearview mirror before ● Both side mirrors fold automatically ● driving. Do not adjust the rearview when the anti-theft alarm system mirror while driving. This may is armed, and extend automatically distract your attention, causing when disarmed.
  • Page 73 infotainment touchscreen and are off if disabled. Low beam Set the light switch to to turn on the Auto lights low beam. Set the light switch to . The body control module captures the brightness data from the light intensity sensor to automatically turn the position lights and low beam on or off.
  • Page 74 CAUTION Once turned on, turn signals ● continue flashing even after the lever is released. They will turn off after the turn is complete. Depending on the driver's driving habits, the turn signals may reset after a full turn of the steering wheel.

  • Page 75: Driver's Door Switches

    Driver's Door Switches Off delay and entry lighting* Off delay: ● Power Window Switches With the combination switch set ● , or , when you When the ignition is on, the window ● power off and lock the vehicle, the switches can be used to roll up or corresponding light keeps on for down windows.

  • Page 76: Passengers' Window Switches

    CAUTION The anti-pinch function may not ● work if an object is jammed into the window when it is almost completely closed. Contacting a BYD authorized ● dealer or service provider for...

  • Page 77: Odometer Switch

    Odometer Switch Sunroof Switch* Press the odometer switch to switch The sunroof can only be operated when ● between "Total Mileage" - "Mileage the vehicle is powered on or when the 1" - "Mileage 2" - "HEV Mileage" - power-off delay has not expired. "EV Mileage".
  • Page 78 If the sunroof has been initialized, While it is closing, the sunroof/sunshade ● briefly touching button ② closes the reopens for a certain distance if anything sunroof automatically. For the sunroof trapped is detected. to stop midway, touch button ① or ②. WARNING Opening the sunshade Keep clear of the sunroof when...

  • Page 79: Emergency Call (E-Call)

    Larger resistance from freezing, snow, Pressing and holding the SOS button ● ● or foreign objects may trigger pinch on the rearview mirror for no more protection and reverses the sunroof/ than 10 seconds triggers the E-Call sunshade. When this happens, wait system manually, but holding for 10-20 after two continuous reversal of the seconds does not.

  • Page 80: Interior Light Switches

    Status LED Indicator Beeping Ignition on and self-check Solid on if self-check is passed passed E-Call connecting Flashing - 1 Hz A beep E-Call connected Flashing - 1 Hz A beep E-Call ended Solid on Two beeps after E-Call ends Callback time (60 minutes by Flashing extremely slowly - default)
  • Page 81 USING AND DRIVING Charging/Discharging...... 82 Batteries..........95 Usage Precautions......98 Starting and Driving......107 Driver Assistance......118...

  • Page 82: Charging/Discharging

    ● the charging equipment and related attention to the following precautions during charging: ports. Contact a BYD authorized dealer or service provider if there is Do not touch the metal connection of a fault. ●...
  • Page 83 Do not close the charge port door ● smell or smoke, stop immediately when the port cap is open. and contact a BYD authorized dealer To prevent failure of the charge or service provider. ● port door, do not open and close it Do not carry out maintenance work repeatedly.
  • Page 84 cable diameter and the adapter/ In the case of low-temperature ● connector specifications must meet charging, the battery thermal local requirements. management can improve the low- temperature charging capacity of the Precautions before charging battery, but the charging time is prolonged and the heating power Do not force the charge port door open ●...
  • Page 85 10A grounded socket overload protection and use other sockets. starts, but has no power supply. battery Stop charging and contact a BYD authorized cannot be The vehicle or AC dealer or service provider if power system fault charged. charging connector warning light or charging system fault message fails.
  • Page 86 It is recommended to contact a visibly stained or damp. In any of ● BYD authorized dealer or service the event, wipe them with a dry and provider or local electrician to clean cloth to ensure the connection select an appropriate power is dry and clean.
  • Page 87 sure that no obstacles exist between REMINDER the head of the charging connector and the end of the charging socket. Scheduled charging cannot be ● used when the battery is too low. Stopping charging 1. End the charging: The charging automatically ends ●...
  • Page 88 Use a standard-compliant household ● REMINDER charging box. For how to use the charging equipment, refer to its user procedure, see in "Charge manual and follow the operating Port Immobilizer System". steps. If you cannot pull the charging Single-phase AC charging pile ●...
  • Page 89 Discharge → Smart Charging → REMINDER Scheduled Charging. In the charging process, the To exit the scheduled charging screen, ● ● instrument cluster displays relevant charging parameters and Setting screen the charging sign. ① Scheduled charging switch At this point, you can schedule ●...
  • Page 90 → → Energy → Charge/Discharge → The scheduled charging function ● Charging Port Immobilizer System. is developed for BYD's slow AC charging equipment only. Disable this function when using non- BYD-certified slow AC charging equipment. Otherwise, scheduled...
  • Page 91 Charging Charge Port Door Anti-theft Vehicle Fully Connector Immobilizer Lock Status Charged or Not Removable or System Status Enabled Locking Enabled Start Disabled Start The vehicle is fully charged Intelligent Locking The vehicle is not fully charged Intelligent / Start Disabled 1.
  • Page 92 Otherwise, a higher target SOC is REMINDER recommended to improve the driving experience. BYD authorized dealer or service provider. When the SAVE mode is off, fuel ● economy is prioritized, although battery power keeping is considered. Target SOC Setting CAUTION When the vehicle runs in dual-mode ●...
  • Page 93 Power Generation by Pressing the WARNING Accelerator Pedal Stop discharging immediately if ● This function meets the need for high- there are any abnormalities such wattage electric power generation while as peculiar smell and smoke. keeping the NVH effect. for discharging safety ●...
  • Page 94 such as cracked housing, worn cable, REMINDER rusted plug, or foreign materials. Before discharging, confirm the There is water or foreign material ● ● vehicle SOC and estimate the inside the charge port, or the metal terminals are damaged by rust, remaining driving range.

  • Page 95: Batteries

    In an emergency, proceed directly When the vehicle is discharged to a ● ● to the next step (which is not low SOC with the ignition off, tap recommended). the "Start the engine to generate electricity when the power is too 2.
  • Page 96 How to scrap an NEV: For new vehicles with normal ● high-voltage battery status, the 1. Take the vehicle to the BYD recycling pure electric mileage will change service provider that will assess the due to different driving habits, residual value of the high-voltage road conditions, temperatures, battery.

  • Page 97: Low-Voltage Battery

    If the vehicle cannot be woken up Waking up the Vehicle from Low SOC and started by the above steps, it is recommended to contact a BYD Wake-up by the driver's door ● authorized dealer or service provider in microswitch: time.

  • Page 98: Usage Precautions

    CAUTION WARNING performing parts replacement and battery is low enough to trigger the engine to generate electricity, vehicle repairs. a small amount of fuel will be consumed and a small amount of CAUTION exhaust gas will be discharged. It is recommended that the ●...

  • Page 99: Trailer Towing

    / receiving phone calls ● depend on equipment usage and good and adjusting buttons). driving habits. BYD does not provide free warranty for Vehicle Use Suggestions ● the damage or faults resulted from the trailer towing. Suggestions for prolong the battery...
  • Page 100 If the tray dented inward or there is performance is affected in low or ● scarification under the battery package high temperature environments. tray, it is suggested to check it at a BYD authorized dealer or service provider. Fuel During operation of the vehicle, ●...
  • Page 101 tank pressure is being released. Please 4. After refueling, screw up the fuel tank cap clockwise and then close the fuel wait." It prompts " Fuel tank door. pressure released. Please refuel." when the release is complete. WARNING Since the fuel is flammable ●...
  • Page 102 better to turn off the engine and start CAUTION it later. Check whether the fuel tank cap Do not stop the vehicle to warm ● ● is tightened and whether the up the engine. Instead, drive slowly fuel door is closed in time after immediately after starting the vehicle refueling.

  • Page 103: Carrying Luggage

    Keep moderate speeds in light objects, while the trunk for large ● motorways. Higher vehicle speed and heavy objects. consumes more fuel. Keep the Make sure the vehicle's total load vehicle speed within the economical ● (vehicle + passengers + luggage) range of speed to save fuel.
  • Page 104 WARNING WARNING Do not pile up toys in the vehicle, concentrate in closed areas, such ● as this may affect driving safety as garages. Do not start the engine and present a hazard to the when the garage door is closed. children, especially in case of Even if the garage door is open, emergency braking or collision.

  • Page 105: Fire Prevention

    It is recommended to go to a BYD Influence of water ingress in high- ● ● authorized dealer or service provider voltage components: for regular vehicle checks.
  • Page 106 Call a fire emergency number (e.g., abnormal heating. ● 119). Then contact a BYD authorized Fuses or other replacement wires in dealer or service provider and your ● excess of relevant electrical rating are insurance provider.

  • Page 107: Starting And Driving

    After you press the START/STOP ● REMINDER button, if the smart key warning light turns on, a beep sounds, and In order to mitigate losses in the the message "No key detected" is ● event of an accident, the purchase displayed on the instrument cluster, of commercial insurance (fire loss, the key may not be in the vehicle...
  • Page 108 Auto Power On/Off CAUTION Enable auto power on/off, disabled Do not start the vehicle for more ● ● by factory default, in the infotainment than 20 seconds at a time, or the touchscreen → → Vehicle → wiring system will overheat. Comfort Driving.
  • Page 109 You can select the regeneration ● REMINDER intensity based on the deceleration sense when releasing the accelerator STOP button must be pressed to pedal. Different deceleration senses power on the vehicle. deliver different driving experiences. Auto power on is not operational ●...
  • Page 110 Before driving long distances, carry out ● is correct. a safety check or, alternatively, take the vehicle to a BYD authorized dealer or Fuel pipe: Check the pipe for any fuel ● service provider for inspection. leakage and loose connections.

  • Page 111: Gear Shift Controls

    Adjust seat position, seatback angle, If the shift is successful, the lever ● ● cushion height, headrest height, and returns to its middle position after it is the steering wheel angle and height. released. Adjust the rearview mirror and side Turn the ignition on before shifting ●...

  • Page 112: Electronic Parking Brake (Epb)

    EHS hybrid transmission is ● CAUTION newly designed high-performance transmission, which features both is steady on to avoid vehicle low fuel consumption of manual slipping. transmission and the comfortable operation of automatic transmission. Engaging EPB Automatically In most driving conditions, EHS hybrid ●...
  • Page 113 Releasing by pressing the accelerator CAUTION pedal: Do not release the brake pedal When the vehicle has been shifted into ● ● early in the process, especially Drive or Reverse and the EPB function when the vehicle is stopped on a has been enabled on the infotainment slope;...
  • Page 114 If it does When the activating conditions of ● not, the EPB or braking system may EPB trailer mode are not met, be faulty. In this case, contact a BYD...

  • Page 115: Automatic Vehicle Hold (Avh)

    ● the EPB is being engaged or released. If there is a burning smell or unusual ● noises after emergency braking is activated, contact a BYD authorized dealer or service provider immediately. WARNING AVH activated To prevent the vehicle from When the AVH standby indicator ●...

  • Page 116: Driving Precautions

    10 minutes, with the AVH standby Avoid driving through flooded areas as ● much as possible. indicator on and vehicle in Park. To activate AVH function, shift into Drive carefully on slippery roads, such ● ● Drive to enable the vehicle to move as roads covered in ice, snow or sand, normally, and then press and hold or surfaces such as wet ceramic tiles or...
  • Page 117 Use anti-freeze washer fluid. ● Winter tires must be the same size, ● load index, and speed rating as those These can be purchased in the BYD ● originally provided by BYD. authorized dealer or service provider and the auto parts stores.

  • Page 118: Driver Assistance

    Before purchasing and installing snow ● Driver Assistance chains, it is recommended to consult a BYD authorized dealer or service provider where your vehicle was Cruise Control* purchased. In order to minimize wear of tires and ●...

  • Page 119: Adaptive Cruise Control (Acc)

    WARNING Improper use of the cruise control ● system may lead to a crash. The cruise control system can only ● be activated in smooth highway traffic in good weather. Adaptive Cruise Control Setup (ACC)* When the vehicle speed exceeds 40 km/h, press the setup button ②...
  • Page 120 ● system. No operation can be performed, and the ACC failure indicator lights up on the instrument cluster. Contact a BYD Resetting ACC authorized dealer or service provider. When the ACC system is on standby ● within the same ignition cycle, the...
  • Page 121 Setting vehicle distance System Limitations The front mmWave radars are installed The driver must select a safe vehicle ● ● in the front of the vehicle. Blockage distance. of its detection area by contaminants The system adjusts vehicle speed to can disturb the intended function.
  • Page 122 In this case, it is is too short, there is no adequate time recommended to contact a BYD for the system to decrease the relative authorized dealer or service provider. speed, so response has to come from the driver.
  • Page 123 When the function is enabled, the (covered in ice/snow or flooded). ● driver must always hold the steering Make sure to go to a BYD authorized wheel and control the vehicle when ● dealer or service provider for necessary.
  • Page 124 ICC activated: toggled on, this switch can be toggled ● off only when the vehicle is in The ICC system is operational. Park.) The system defaults to previous ● It maintains the set speed or settings when the vehicle is just automatically adjusts the distance started.
  • Page 125 The is displayed to indicate ● driver must always pay attention malfunction, contact a BYD authorized to road conditions and ICC states. dealer or service provider. Use ICC based on your needs, If you disable AEB manually by ●...
  • Page 126 FCW Activation Conditions On rainy, snowy or foggy days, or ● exposure to direct sunlight or glaring All the following conditions must be ● lights, or significantly varying lighting met: conditions. This function has been turned on in ● Dirty, hazy, damaged or blocked the infotainment touchscreen.
  • Page 127 safety tool. The driver must always As the pedestrian protection function ● keep a safe distance from vehicles is limited by certain physical ahead, control the speed, and be ready conditions, the driver must take timely to brake or steer away when necessary. and effective control of the vehicle The driver must keep control of the under dangerous conditions.
  • Page 128 Make sure to go to a BYD the value on the recognized speed limit ● authorized dealer or service provider sign, the system prompts whether to for professional calibration of the adjust it to that limit value. The setting front mmWave radar or multi-purpose...
  • Page 129 incorrectly identify the sign at night HMA has failed, and is displayed. ● or sunset, in rainy, foggy, hazy, snowy or dusty environment, when light is How to Use coming from the back of the vehicle, or when there is a sudden change in To enable or disable IHBC, go to the ●...
  • Page 130 ● sensor has been reassembled, it audible alarms at the fifth second and is recommended to go to a BYD continues until this activation ends. authorized dealer or service provider Alarm mode: audible alarm and visual for sensor calibration so as to avoid alarm.
  • Page 131 If it does not, it days is recommended to contact a BYD Unidentifiable road boundary with authorized dealer or service provider. ● grass, soil, or curb Disabling LDW is recommended under ●...
  • Page 132 Situations that may cause recognition ADAS → Safety Assist → Emergency ● difficulty or late function activation of Lane Keeping Assist. the multi-purpose camera include, but When ELKA is active, flashes on the are not limited to: ● instrument cluster. The multi-purpose camera comes off, ●...

  • Page 133: Blind Spot Assist (Bsa)

    Unclear or incomplete lane lines BSD* ● Situations that may result in detection At vehicle speeds between 15-150 km/h, ● failure of the multi-purpose camera or if a rear corner mmWave radar detects late alarms include, but are not limited a vehicle in blind spots on an adjacent lane or a vehicle approaching quickly on the adjacent lane, the indicator on the...
  • Page 134 indicators on side mirrors solid on to The BSD system may be unable to ● warn the driver if moving objects, such as provide adequate warning on target bicycles or automobiles, approach from vehicles approaching from behind at a behind on an adjacent lane. At the same high speed.

  • Page 135: Head-Up Display (Hud)

    If this is detected, Height adjusting: Used to adjust ● contact a BYD authorized dealer or the height of HUD virtual image in service provider. between -10 and 10. A total of 21 values are available, and the default WARNING value is 0.
  • Page 136 Direct Tire Pressure electromagnetic source nearby. If the alarm persists for a long time, please Monitoring System contact a BYD authorized dealer or service provider. The direct tire pressure monitoring ● WARNING system is an auxiliary system that...

  • Page 137: Acoustic Vehicle Alerting System (Avas)

    On the infotainment touchscreen, spare tires* or tire rotations. Go ● to a BYD authorized dealer or users in some countries can turn on or off the engine sound simulator on the...
  • Page 138 AVM it is recommended to contact a ● system to enable the radar display, BYD authorized dealer or service and tap it again to disable. When provider. the radar display is enabled, a warning is displayed as the vehicle is Around View Monitoring approaching an obstacle.
  • Page 139 When the vehicle is just started, ● WARNING the image before last power-off is displayed for the transparent around comparison with the actual view. Foreign bodies shown may be object. inconsistent with the actual ones in the underbody and surrounding blind When the side mirrors are not ●...

  • Page 140: Parking Assist

    Sensor Type WARNING When the sensor detects an obstacle, When no camera is available, ● ● an image is displayed on the a "No video signal detected" infotainment touchscreen according to message is displayed. the location of the obstacle and its distance from the vehicle.
  • Page 141 Approximate Distance Touchscreen Display Alarm Sound (mm) Example About 700 to 1,200 Slow About 400 to 700 Fast About 200 to 400 Continuous Working example of corner sensors Approximate Distance Touchscreen Display Alarm Sound (mm) Example About 400 to 600 Fast About 200 to 400 Continuous...
  • Page 142 The sensor has been repainted. ● are no obstacles around the vehicle The vicinity is noisy due to honking and the issue persists, go to a BYD ● of vehicles, motorcycle engines, authorized dealer or service provider air brakes of large vehicles, or...

  • Page 143: Driving Safety Systems

    CAUTION TCS prevents the drive wheels from To prevent sensor malfunction, do skidding during acceleration by reducing ● not rinse or apply steam to the the engine power, and, when necessary, sensor area. applies braking forces to prevent drive wheels from idling. It makes the vehicle easy to start, accelerate, and climb under Driving Safety Systems adverse driving conditions.
  • Page 144 Intelligent power braking system has the discs. This shortens brake response following new functions compared with time and braking distance. the original ESC system: As long as the system detects rain ● Brake assist mode or the wiper ON signal, the brake ●...
  • Page 145 For details on tire or wheel ● pedal for the ABS to work. replacement, it is recommended to contact a BYD authorized dealer or When the ABS is working, the brake ● service provider. pedal will vibrate, which may produce noise.
  • Page 146 It is recommended to contact a BYD authorized dealer or service provider. In this case, if brakes are applied, ● the ABS will not work and the vehicle will become extremely unstable.
  • Page 147 IN-VEHICLE DEVICES Infotainment System...... 148 A/C System........157 BYD App...........162 Storage..........163 Other Devices........166...

  • Page 148: Infotainment System

    Infotainment On the infotainment touchscreen, tap ● → Version → factory reset → System Reset. This should factory reset the ● infotainment system. Infotainment Touchscreen During the process, do not touch any ● infotainment button or turn off the When the ignition is on, the initial screen power supply, or errors may occur.

  • Page 149: Navigation Bar

    Tapping: opens applications, selects ● CAUTION functions, clicks icons on the touchscreen, or types characters. wearing sunglasses. In that case, change the viewing angle or take Dragging: touches and drags an icon, ● off the sunglasses. thumbnail, or preview to the target location and releases to change its Touchscreen buttons that are ●...

  • Page 150: Bluetooth Call

    4. Set Bluetooth when connection is complete. BYD Assistant Bluetooth Call Go to the dialing screen when Bluetooth BYD Assistant is an intelligent voice is connected. assistant that responds to your Tap Contacts, Call log, and Missed voice commands, such as requesting ●...

  • Page 151: Phone Projection

    Dynaudio Sound Sort Dynaudio sound, which includes Files are sorted by name by default. ● ● Acoustic, Dynamic, Soft, Speech, and You can also sort them by size, type, or Customize, provides different musical time. experiences. Attributes Volume Adjusted with Speed Touch and hold any file, select a file, ●...
  • Page 152 To activate the connection, do as Switching between Apple CarPlay and ● follows. built-in infotainment system 1. On the infotainment touchscreen, To exit from Apple CarPlay, tap the BYD ● tap the Apple CarPlay icon , and icon on Apple CarPlay's home pair your iPhone to the vehicle as screen.
  • Page 153 Connecting the USB port of the phone ● histories and reconnect. If the issue being connected wirelessly—which persist, contact a BYD authorized starts charging only—will not trigger dealer or service provider. the switching prompt, but connecting that of another phone will.
  • Page 154 Content & Privacy Restrictions is Connecting wirelessly on, tap Allowed Apps & Features To activate the connection, do as to make sure that Apple CarPlay is ● follows. enabled. 1. On the infotainment touchscreen, If Apple CarPlay is disconnected ● tap the Android Auto icon , and by turning the vehicle hotspot off,...
  • Page 155 To go back to Android Auto, tap the Android Auto is not supported ● ● on phones running Android (Go Android Auto icon on the built- edition). in infotainment system's application screen. Verify that your phones has the latest ● version of Android Auto app.
  • Page 156 (the latest version 3. On the vehicle infotainment recommend) touchscreen, go to → System Many BYD vehicles nearby with ● → Link → WLAN, then delete the identical hotspot names device you want to project from Faulty or malfunctioning the Connected Devices.

  • Page 157: A/C System

    A/C System REMINDER Wireless Android Auto ● A/C Buttons connections reply on the use of Wi-Fi on your phone, which could interrupt Wi-Fi connections on ① A/C auto mode your phone. ② A/C ON/OFF Wireless Android Auto ● ③ Front windshield defroster connections reply on the use of vehicle hotspot, which could interrupt Wi-Fi connections on the...
  • Page 158 Provides two options: Eco and Turns this function on or off. ● ● Comfort. A/C Operation Interface Remote A/C Schedule Sets the time for remote A/C running. Front-row A/C operation interface ● Auto Fan Speed Reduction During Bluetooth Calls Front windshield defroster A/C Operation Interface Defroster for rear windshield and Seat ventilator*...

  • Page 159: Function Definitions

    Press this button on A/C control is recommended to contact a ● panel or tap F on the touchscreen to BYD authorized dealer or service distribute air to the front windshield provider for repair. and side windows. Pressing or tapping...
  • Page 160 To increase/decrease the Tap this button to switch the A/C to ● ● temperature, tap the upper/lower the maximum cooling control mode. arrow on the screen, or touch the The temperature is set to "Lo", the temperature display area and then fan speed is set to the maximum, the swipe downwards/upwards.
  • Page 161 A/C Cloud service* ventilation control and enter AUTO You can turn on the A/C remotely mode. ● through the BYD App to gain a Air distribution comfortable cabin environment in advance. Tap an icon on the infotainment ●...

  • Page 162: Byd App

    Toggle the slat up or down to adjust ● the outlet angle of air flow. Search for "BYD" in Google Play or App ● Store to download and install BYD app. Slide the slat left or right to adjust the ●...

  • Page 163: Storage

    2. Enter email address registered in BYD 5. If you have multiple vehicles on an authorized dealer, tap Send email to account, tap the vehicle name in the receive verification code, and then upper left corner of the screen to enter the code in the app.

  • Page 164: Center Console Storage Compartment

    Center Console Cubby REMINDER Keep the glove box closed while ● Pull up the center console cubby to open the vehicle is in motion. Center Console Storage Compartment The center console storage ● compartment can be used for storage of small items. REMINDER Keep the front center console ●...

  • Page 165: Seatback Pockets

    Seatback Pockets REMINDER The cup holder should hold a cup There are seatback pockets at the back ● ● of the front seats for magazines and or beverage can securely to avoid any liquid spilling. newspapers. Please keep the inside of the cup ●...

  • Page 166: Other Devices

    Other Devices Sun Visor ① Sun visor To block sunlight from the front, pull ● the sun visor down. To block sunlight from a side, remove ● the swivel sleeve from the fixed CAUTION support and turn the visor towards the side window.
  • Page 167 CAUTION CAUTION damage to the infotainment Insert the card correctly. ● system or data in the USB device. Since 64GB and 128GB TF cards ● in market are generally non-FAT32 Rear-row USB ports format, it is required to converted them into FAT32 format on the The rear USB ports are located behind the infotainment touchscreen after center console cubby, and can be opened...
  • Page 168 BYD authorized dealer touchscreen. or service provider. After starting the vehicle, put the ●...
  • Page 169 If it malfunction if water enters the is still impossible to charge the wireless charger via the gap phone, contact a BYD authorized around the rubber mat. dealer or service provider. Charging may stop at high If the charging dock remains ●...

  • Page 171: Maintenance

    MAINTENANCE Maintenance Information....172 Regular Maintenance......176 Self-Maintenance......182...

  • Page 172: Maintenance Information

    Maintenance If the vehicle is operated primarily under one or more of the following special Information conditions, some maintenance items may need to be performed more frequently. Road conditions Maintenance Cycle and ● Muddy, sandy, or snowy roads. Items ● Dusty roads ●...
  • Page 173 Maintenance Item Time/Mileage Interval Drive shaft boot Check every 12 months or 15,000 km Ball pin and dust boot Check every 12 months or 15,000 km Front and rear suspensions Check every 12 months or 15,000 km Front and rear wheel alignment Check every 12 months or 15,000 km Check during maintenance and rotate the tires when necessary;...
  • Page 174 Maintenance Item Time/Mileage Interval Deformation of or oil stains on the Check every 12 months or 15,000 km; in special or high-voltage module severe working conditions, check more frequently Foreign materials on or ablation of Check every 12 months or 15,000 km; in special or charging connector interface severe working conditions, check more frequently Check every 12 months or 15,000 km;...
  • Page 175 72,000 km) for battery purchase date. self-calibration. You can also To keep the vehicle in the optimum contact a BYD authorized dealer ● state, follow the instructions below to or service provider for capacity operate the vehicle correctly.

  • Page 176: Regular Maintenance

    BYD Auto Industry Co., engine. Ltd., and by a local BYD authorized dealer or service provider. Severe driving conditions refer to: ● The maintenance schedule lists the Frequent driving in dusty areas or ●...
  • Page 177 The vehicle exhausts blue smoke or surface, it is recommended to go to ● thick black smoke. a BYD authorized dealer or service provider for repair. A/C system fails to blow cold or hot ● air during refrigeration or heating.

  • Page 178: Exterior Cleaning

    Special care should be taken when provider for maintenance once every ● the vehicle is transporting chemicals, three months. detergents, fertilizers, salt, and other High quality polish and wax must substances. Such substances should ● be used. If body finish is severely be kept in appropriate containers for weathered, use a vehicle cleaning transportation.

  • Page 179: Interior Cleaning

    Manual Vehicle Washing REMINDER Before washing the vehicle, park it in the Do not use blades or gasoline to shade, and wait for the vehicle to cool ● remove hard dirt from the vehicle down sufficiently. body. The plastic wheel trim is easily damaged by organic matter.
  • Page 180 dust accumulation, wipe it with a wet REMINDER soft cloth. Do not wash the vehicle's floor to ● CAUTION prevent corrosion. When cleaning the inside of the ● rear windows, take care not to Carpet scratch or damage electric heating wires or junctions.
  • Page 181 If the seat is wet, use a soft For any questions about vehicle ● ● towel or tissue paper to dry it in cleaning, please consult a local BYD time, and do not use a hairdryer authorized dealer or service provider. immediately. CAUTION...

  • Page 182: Self-Maintenance

    Self-Maintenance CAUTION If any brake fluid overflows, rinse ● Self-Maintenance it with water to prevent damage to components or vehicle paint. Self-Maintenance Precautions Do not drive the vehicle with the ● air filter removed, otherwise, the If maintenance is to be carried out by engine will be excessively worn.
  • Page 183 ● pedal can be operated freely and the front combination lights aligned whether the brake light switch limiting by a BYD authorized dealer or service pad is aged or damaged. provider. EPB switch: Check whether the switch Fogging of lights ●...

  • Page 184: Sunroof Maintenance

    Dry the residual recommended to drive the vehicle moisture on the sunroof to prevent it to a BYD authorized dealer or from freezing. service provider for maintenance. Do not open the sunroof fully on ●...
  • Page 185 If the vehicle has been parked hands until the hood is fully locked for a year or more, go to a BYD and closed. Keep your hands at a authorized dealer or service provider certain distance and do not press the for comprehensive maintenance.
  • Page 186 role in maintaining the proper working condition of engine. Check engine oil Check oil dipstick ● 1. Park the vehicle on a level road, start the engine till it reaches the normal working temperature, and then shut down the engine. 2.

  • Page 187: Coolant System

    seconds to activate the cylinder CAUTION cleaning. Do not add any rust inhibitor ● Coolant System or other additives to the cooling system for they may be incompatible with the coolant or Coolant Selection the motor components. Before opening the expansion Engine expansion tank ●...

  • Page 188: Windshield Washer

    It is recommended to replace the ● fuel filter at a BYD authorized dealer In bad weather, if the windshield ● or service provider. Because there is washer is used frequently, the level...

  • Page 189: Wiper Blade Maintenance

    After washing the vehicle, rinse the It is recommended to contact a BYD blade with plain water, and use special authorized dealer or service provider. windshield wax cleaner to remove the wax layer on the windshield.
  • Page 190 2. Grasp the upper end of the wiper according to the tire pressure values arm and carefully lift the wiper arm displayed on the instrument cluster. and blade assembly. Tire pressure should be measured ● when the tires are cold. This means Tires that it should be measured at least three hours after stopping the vehicle.
  • Page 191 ● used for the vehicle. If uneven tire wear is found, go ● to a BYD authorized dealer or After tire replacement, go to a BYD ● service provider and check the wheel authorized dealer or service provider alignment. for tire pressure matching.
  • Page 192 Fuses It is recommended to replace with ● original tires at a BYD authorized All vehicle circuits are provided with fuses dealer or service provider. to prevent short circuit or overloading. These fuses are mounted in the under- Replacement of tires with different ●...
  • Page 193 If a fuse blows, it is recommended ● to check or replace the fuse at a BYD authorized dealer or service provider.
  • Page 195 WHEN FAULTS OCCUR When Faults Occur......196...

  • Page 196: Reflective Vest

    If all keys cannot be temperature. used, the key or smart key system may Magnetic fields generated by fail. In this case, contact a BYD authorized ● nearby radio stations, substations dealer or service provider. or airport radio transmitters...
  • Page 197 If the vehicle to repeated starts. cannot be started, it is recommended If the engine is flooded, the to contact a BYD authorized dealer or ● following operations can be performed service provider for inspection.
  • Page 198 A serious loss of coolant indicates a leakage in the 2. If the "high engine coolant system. In this case, contact a BYD temperature" warning light turns on, authorized dealer or service provider stop the engine. If there is a sound for inspection immediately.
  • Page 199 the vehicle on front or rear wheels 2. Install the tow eye in the tow eye alone may damage high-voltage opening. components. If the vehicle needs rescue, call a ● professional rescue or the customer CAUTION service number. When moving a vehicle on a flat In emergency situations where the ●...

  • Page 200: If A Tire Goes Flat

    When freeing the vehicle, control to Be sure to have all passengers get off ● ● make it travel in the direction of tow the vehicle and ask them to go to a force. Dragging the vehicle from the safe place away from crowded traffic. side or vertically is prohibited.
  • Page 201 In an emergency where you need to ● WARNING service the vehicle yourself, you must know how to use these in-vehicle tools The tire repair kit is only suitable ● and their locations. for minor damages of tires. If a wheel is damaged, do not use the Placing the warning triangle tire repair kit.
  • Page 202 If the tire pressure does not reach 130 shown in the illustration), turn off ● kPa, it is recommended to contact the inflator. You are recommended to a BYD authorized dealer or service contact a BYD authorized dealer or provider. service provider. REMINDER Using tire repair kit on damaged ●...
  • Page 203 Place the wedges in front of the front ● REMINDER wheels or behind the rear wheels. Avoid hard acceleration and high- ● speed turns. Do not exceed the 80 km/h ● maximum speed limit and replace flat tires as soon as possible. Do not drive further if the vehicle experiences strong vibration, unstable performance, or noise.
  • Page 204 WARNING or tip the vehicle off the jack, causing personal injuries. 5. Jack up the vehicle After confirming that no one is in ● the vehicle, jack up the vehicle to a height allowing for spare tire installation. Installing a spare tire 4.
  • Page 205 Before replacing the tire, remove Lower the vehicle completely ● ● corrosion from the mounting surface by turning the jack lever with a wire brush or other tools. counterclockwise. Tighten the nuts in the sequence ● WARNING shown, each a bit a time. Repeat until all nuts are tightened.
  • Page 206 than the specification, slowly drive to a nearby service station to inflate the tire to the correct pressure value. Be sure to mount the tire valve cap, ● otherwise dust and moisture will enter the valve stem and cause air leakage. If the valve cap is lost, use a new one as soon as possible.

  • Page 207: Specifications

    SPECIFICATIONS Vehicle Data........208 Information........212 Declarations of Conformity.... 215...

  • Page 208: Vehicle Data

    Vehicle Data Technical Data Dimensions Item Parameter Length (mm) 4,980 Width (mm, excluding side mirrors) 1,890 Height (mm) 1,495 Wheelbase (mm) 2,900 Front track (mm) 1,640 Rear track (mm) 1,650 Front overhang (mm) Rear overhang (mm) 1,110 Approach angle (°) Departure angle (°) Vehicle mass Item...
  • Page 209 Item Parameter Engine type Four-stroke ignition Displacement (L) 1.497 Rated power (kW/rpm) 102/5,200 Maximum net power (kW/rpm) 96/5,200 Maximum torque (N•m/rpm) 231/(1,500–4,000) Emission standard High-voltage battery Item Parameter Type Lithium iron phosphate battery Rated capacity (Ah) Drive motor Item Parameter Model TZ220XYT Type...
  • Page 210 Item Parameter Tire pressure (kPa) Wheel dynamic balance requirement (g) <10 Wheel alignment values (at curb weight) Item Parameter Front camber (°) -0.68±0.75 Total front wheel toe-in (°) 0±0.16 Kingpin inclination angle (°) 13.75±0.75 Kingpin caster angle (°) 5.05±0.75 Rear camber (°) -1±0.75 Total rear wheel toe-in (°) 0.4±0.16...
  • Page 211 Item Parameter Fore and aft positions for front seats 260 mm forward from the end of slide rail (cushion depth measured) travel Seatback angle of front seats (cushion 25° depth measured) 20° forward and 40° backward adjustable Normal service conditions of front from the design position;...

  • Page 212: Vehicle Identification

    Information VIN is engraved on the lower beam of the front passenger seat. By connecting the vehicle diagnostic system, the VIN can be found in the upper right corner of the Vehicle Identification screen for the corresponding model. For details, refer to the operation manual of Vehicle Identification Number (VIN) the system.

  • Page 213: Warning Labels

    Model and Serial Number of Engine and Side airbag warning labels are attached Drive Motor on the lower part of the left and right B- pillars. ① The model and serial number of the engine are engraved on the side of the assembly surface on the cylinder exhaust side.
  • Page 214 Lables on these products are defined as follows: Lable Definition Warning Pressurized cylinder Refer to owner's manual No open flame Not to be serviced by users Recycle separately (Note: Contact a BYD authorized dealer or service provider.)

  • Page 215: Declarations Of Conformity

    Lable Definition No shaking or cranking No stepping on Transponder Mounting CAUTION Position Do not overlap the sticker ● transponder with the glass frame The transponder mounting position is or other objects. located in the upper right of the front windshield.
  • Page 216 The United States FCC ID: 2A5DH-DAEA-92 Model: D0-92, D1-92 Corner MmWave Radar EU countries Certificate ID: RED GZES2210019337AT Uzbekistan Certificate ID: UZ.SMT.01.0085.110554275 Brazil Certificate ID: 12803-22-14807 This equipment is not entitled to protection against harmful interference and may not cause interference to duly authorized systems.
  • Page 217 Numerics Coolant Selection......Cruise Control*......12V Auxiliary Power...... Data Collection and Processing..Declarations of Conformity..A/C Buttons........Direct Tire Pressure Monitoring A/C Control Panel, Speakers, System........... Dashboard, Control Panel, and Discharging Instructions*....Switches........Disclosure of Personal Data to A/C Operation Interface....Authorities........
  • Page 218 Gear Shift Controls....... Maintenance Cycle and Items..General Charging Troubleshooting Maintenance Plan......Gestures and Responses....Manual Vehicle Washing....Glasses Case........Glove Box........Grab Handles........ Navigation Bar......Hazard Warning Light Switch..Head-up Display (HUD)*....High-Voltage Battery...... Odometer Switch......Opening and Closing the Hood..OTA Updates*........
  • Page 219 Smart Access and Start System..Smart Key........Snow Chains......... Starting the Vehicle....... Steering Assist Mode Settings..Steering Wheel Switches....Sun Visor........Sunroof Maintenance*....Sunroof*.......... Target SOC Setting......Tires..........Trailer Towing......... Transponder Mounting Position.. USB Ports........Using Seat Belts......Vehicle Cleaning......Vehicle Corrosion Prevention..
  • Page 221 Abbreviations Abbreviations Termin Termin Full Name Full Name ology ology International Standards Supplemental Restraint System ISOFIX Organization Fix Ecology, Conservation, NORM Normal Optimization SPORT Sport Hybrid Electric Vehicles Electric Vehicle Event Data Recorder Electronic Stability Controller Gasoline Particulate Filter Near Field Communication Hydraulic Brake Assist State of Charge Traction Control System...

Table of Contents