Page 2
• the iPod touch (recent generations) the iPhone ® ® • You can also connect the XGPS150A to many smart phones and tablets, as well as computers running Windows or OS X. NOTE: Not all manufacturers include SPP in their devices, even if the device has Bluetooth.
Page 3
This light is normally off while the XG- PS150A is running. Bluetooth status indicator. This light will indicate whether the XGPS150A is searching for a device to connect to, negotiating a connection with a...
Page 4
A slow flash (about once per second) indicates the XGPS150A is available to connect to another de- vice. A quick flash (approx. 5 times per second) briefly happens when the XGPS150A is pairing with another device.
Page 5
Mode switch ·Right for iPad/iPod/iPhone ·Left for all other devices Mode switch. The mode switch must be set for the device you want to use the XGPS150A with: Switch Position For these devices: Left (towards USB • Android, Windows &...
Page 6
• Set the mode switch on the XGPS150A for the type of device you will be using. • Turn on the the XGPS150A and pair it with the device you will be using. Setting the mode switch...
Page 7
Bluetooth to allow them to communicate. You will need to go through the pairing process the first time you use the XGPS150A with a new device. Once the XGPS150A is paired with a device, the two devices will remember their connection and you will not need to repeat the pairing process.
Page 8
• Make sure the mode switch on the XGPS150A is positioned to the right (for more information, see Setup). • If not already on, turn on the XGPS150A. The blue Bluetooth status light on the XGPS150A should be blinking slowly (about once per second).
Page 9
XGPS150-xxxxxx change to blue text and the word Connected will appear. The blue LED on the XGPS150A will blink rapidly for a few seconds and then stay illuminated, confirming the two devices have successfully paired and are communicating.
Page 10
• Make sure the mode switch on the XGPS150A is in the left position (for more information, see Setup). • If not already on, turn on the XGPS150A. The blue Bluetooth status light on the XGPS150A should be blinking slowly (about once per second).
Page 11
XGPS150A the last 6 digits are part of the XGPS150A serial number and will vary from device to device.) At this point, the Android device may say Paired and the blue Bluetooth but not connected indicator on the XGPS150A will continue to blink slowly.
Page 12
• Make sure the mode switch on the XGPS150A is in the left position (for more information, see Setup). • If not already on, turn on the XGPS150A. The blue Bluetooth status light on the XGPS150A should be blinking slowly (about once per second).
Page 13
“0000” or “1234”. • The computer will return to the Bluetooth window and show the XGPS150A in the list of devices. At this point, pairing is completed. However, the device status will be...
Page 14
XGPS150A • If not already on, turn on the XGPS150A. The blue Bluetooth status light on the XGPS150A should be blinking slowly (about once per sec- ond). • From the Blackberry main menu go to: Manage Connections and turn on Bluetooth.
Page 15
USB wall charger, including the one which came with your iPad/iPod touch/iPhone. Tips for best performance • Put the XGPS150A in a location with a clear view of the sky: the dashboard of your car, up on the glareshield of a plane, a boat bulkhead, the shoulder strap of a backpack, etc.
Page 16
XGPS150A in a car or on a boat. Slide the XGPS150A into the pad to secure it, making sure that the lip of the pad seals over the top edges of the XGP- S150A. The XGPS150A is not waterproof, but it will withstand light splashing when it is seated properly in the non-slip pad.
Page 17
Bluetooth. Step 3. Completely power down and reboot both the device and the XGPS150A. • The battery in the XGPS150A is not user-ser- viceable. For battery issues, please contact Cus- tomer Support for additional help: send email to cs@dualav.com or call 866-382-5476.
Page 18
XGPS150A Specifications Dimensions (WxHxD in mm) • XGPS150A: 55.0 x 55.0 x 18.5 • Non-slip pad: 94.0 x 144.0 x 22.0 • L1 frequency, SBAS (WASS, MSAS, EGNOS, GAGAN) supported. • Cold start: < 29 sec. typ. (open sky) • Warm start: < 25 sec. typ. (open sky) Bluetooth •...
Page 19
XGPS150A ICC Compliance This Class [B] digital apparatus complies with Ca- nadian ICES-003. FCC Compliance This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interfer-...
Page 20
XGPS150A Compliance (cont’d) stallation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: •...
Page 21
Who is covered? This warranty is extended to the original retail purchaser for products purchased from an authorized Dual dealer and used in the U.S.A. What is covered? This warranty covers all defects in material and workmanship in this product. The...
Page 22
XGPS150A Warranty (cont’d) the product, or damage occurring during return shipment of the product. Specific license condi- tions and copyright notices for the software can be found via http://www.dualav.com. What to do? 1. Before you call for service, check the appropri- ate section in this manual.
Page 23
XGPS150A Warranty (cont’d) tion the implied warranties of merchantability and fitness for a particular purpose and any obligation, liability, right, claim or remedy in contract or tort, whether or not arising from the company’s negli- gence, actual or imputed. No person or represen-...
Need help?
Do you have a question about the XGPS150A and is the answer not in the manual?
Questions and answers