Related Manuals for Performance Tool W54170
Summary of Contents for Performance Tool W54170
- Page 1 12 VOLT OIL EXTRACTION PUMP Item Number W54170 OWNER'S MANUAL WARNING: READ, UNDERSTAND AND FOLLOW ALL INSTRUCTIONS AND WARNINGS BEFORE OPERATING THIS TOOL. FAILURE TO DO SO MAY RESULT IN PERSONAL INJURY AND/OR PROPERTY DAMAGE AND WILL VOID WARRANTY.
- Page 2 TOOL FEATURES The oil-extractor is a vane pump with brass lamellas. It is driven by a 12V-D.C.-motor via a reduction gear. As power supply please use a 12V- vehicle battery. The connections on the pump are built for hoses of 10mm internal diameter. The external diameter of the suction-probe is 6 mm.
- Page 3 SAFETY GUIDELINES / DEFINITIONS This instruction manual is intended for your benefit. Please read and follow the safety, installation, maintenance and troubleshooting steps described within to ensure your safety and satisfaction. The contents of this instruction manual are based upon the latest product information available at the time of publication.
- Page 4 TOOL SAFETY CONT. • Protect the power supply cables against heat and sharp edges. • Make sure that the pump is connected correctly to the car battery before starting to work (plus to plus and minus to minus). • Do not pump water (no lubrication of the pump). •...
- Page 6 After 90 days and up to one year from date of purchase, PERFORMANCE TOOL® will replace at no charge any parts which our examination shall disclose to be defective and under warranty. These warranties shall be valid only when a sales receipt showing the date of purchase accompanies the defective product or defective part (s) being returned.
Need help?
Do you have a question about the W54170 and is the answer not in the manual?
Questions and answers