Related Manuals for Draytek Vigor C410 Series
Summary of Contents for Draytek Vigor C410 Series
- Page 1 Vigor C410/C510 Series VPN Router with WLAN/LTE/5G-NR Quick Start Guide Version: 1.0 Firmware Version: V5.3.1 (For future update, please visit DrayTek web site) Date: March 26, 2025...
- Page 2 Intellectual Property Rights (IPR) Information © All rights reserved. This publication contains information that is protected Copyrights by copyright. No part may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language without written permission from the copyright holders. The following trademarks are used in this document: Trademarks Microsoft is a registered trademark of Microsoft Corp.
-
Page 3: Declaration Of Conformity
Declaration of Conformity Hereby, DrayTek Corporation declares that the equipment type Vigor C410/C510 series is in compliance with Radio Equipment Directive 2014/53/EU, Low Voltage Directive 2014/35/EU and RoHS 2011/65/EU. The full text of the EU Declaration of Conformity is available at the following internet address: https://fw.draytek.com.tw/Vigor%20C410/Document/CE/... - Page 4 89.3% efficiency Efficiency at 73.6% 78.0% 81.3% 83.3% 83.7% 74.5% 80.5% 86.4% 85.4% 85.4% 84.7% 87.7% low load 10% No-load power 0.07W 0.07W 0.07W 0.07W 0.07W 0.07W 0.10W 0.07W 0.10W 0.10W 0.08W 0.10W consumption For more update, please visit www.draytek.com.
-
Page 5: Table Of Contents
1. Package Content ................1 2. Panel Explanation................2 2.1 Vigor C410 ....................2 2.2 Vigor C510 ....................3 2.3 Vigor C410ax ....................4 2.4 Vigor C510ax ....................6 3. Hardware Installation ..............8 3.1 Network Connection ..................8 3.2 Wall-Mounted Installation..................9 3.3 Antenna Installation..................10 4. -
Page 6: Package Content
Take a look at the package content. If there is anything missed or damaged, please contact DrayTek or dealer immediately. Vigor Router Quick Start Guide Antenna Antenna (for ax model) RJ-45 Cat-5 Ethernet Cable The type of the power adapter depends on the country that the router will be installed. -
Page 7: Panel Explanation
Status Explanation Blinking The router is powered on and running normally. The router is powered off. Internet connection is ready. Blinking The data is transmitting. Internet connection is not ready. SIM card is inserted into the slot and detected by Vigor device. -
Page 8: Vigor C510
Status Explanation Blinking The router is powered on and running normally. The router is powered off. Internet connection is ready. Blinking The data is transmitting. Internet connection is not ready. SIM card is inserted into the slot and detected by Vigor device. -
Page 9: Vigor C410Ax
Status Explanation Blinking The router is powered on and running normally. When both ACT and WLAN LEDs blink quickly, it Blinking means the WPS function is enabled and active. The system is waiting for a wireless station of (quickly) connection. The router is powered off. - Page 10 Interface Description Connecter for installing WLAN antennas. (For ax model). WLAN On - Press the button and release it within 2 seconds. When the wireless function is ready, the green LED will be on. WLAN Off - Press the button and release it within 2 seconds to turn WLAN off the WLAN function.
-
Page 11: Vigor C510Ax
Status Explanation Blinking The router is powered on and running normally. When both ACT and WLAN LEDs blink quickly, it Blinking means the WPS function is enabled and active. The system is waiting for a wireless station of (quickly) connection. The router is powered off. - Page 12 Interface Description Connecter for installing WLAN antennas. (For ax model). WLAN On - Press the button and release it within 2 seconds. When the wireless function is ready, the green LED will be on. WLAN Off - Press the button and release it within 2 seconds to turn WLAN off the WLAN function.
-
Page 13: Hardware Installation
This section will guide you to install the router through hardware connection and configure the router’s settings through web browser. Before starting to configure the router, you have to connect your devices correctly. Here we take Vigor C410 as an example. Connect the cable Modem/DSL Modem/Media Converter to any WAN port of router with Ethernet cable (RJ-45). -
Page 14: Wall-Mounted Installation
Vigor router series has keyhole type mounting slots on the underside. Drill two holes on the wall. The distance between the holes shall be 168mm. Fit screws into the wall using the appropriate type of wall plug. With the screws installed, the router can be slotted into place. Note The recommended drill diameter shall be 6.5mm (1/4”). -
Page 15: Antenna Installation
Antenna must be installed on Vigor router correctly to obtain the transmission signal. For model with SIM installed For ax models There are two types of antennas provided for Vigor C410ax / C510ax, which must be installed in different locations carefully and correctly. Wrong installation might cause bad signal of wireless connection. - Page 16 Note: The antennas for Vigor C410 must be installed on both sides of the device. If only one antenna will be used, please install on the left side of Vigor router. Major signal transmission port For installing the SIM card into the card slot, (1) While installing the SIM card into the card slot, note that the back plate of the SIM card slot must be removed first.
-
Page 17: Software Configuration
By default, you can access the Internet if you finish the hardware installation. However, you might need to access the web user interface of the Vigor router for some reason; for this, follow the steps listed below. Make sure your PC connects to the router correctly. Open a web browser on your PC and type https://192.168.1.1. - Page 18 You MUST change the login password before accessing the web user interface. Please set a new password for network security. Now, the Main Screen will pop up. Note The home page will change slightly in accordance with the router you have.
-
Page 19: Customer Service
If the router cannot work correctly after trying many efforts, please contact your dealer/DrayTek for further help right away. For any questions, please feel free to send e-mail to support@draytek.com. Web registration is preferred. You can register your Vigor router via https://myvigor.draytek.com.
Need help?
Do you have a question about the Vigor C410 Series and is the answer not in the manual?
Questions and answers