Playback; Playing The Connected Component - Onkyo HT-S5500 Instruction Manual

Playback

The on-screen menus appear only on a TV that is
connected to the HDMI OUT. If your TV is connected
to other video outputs, use the AV receiver's display
when changing settings.
This section describes the procedure for using the
remote controller unless otherwise specified.

Playing the Connected Component

■
Operating with the remote controller
INPUT SELECTOR
RECEIVER
VOL /
Listening mode buttons
1 Press RECEIVER followed by an INPUT
SELECTOR button.
2 Start playback on the source component.
See also:
• "Playing an iPod/iPhone via USB"
• "Playing a USB Device" (➔ page
(➔ page
• "Listening to AM/FM Radio"
• "iPod/iPhone Playback via Onkyo Dock"
(➔ page 53)
• "Controlling Other Onkyo Components"
(➔ page 55)
3
To adjust the volume, use VOL / .
4
Select a listening mode and enjoy!
See also:
• "Using the Listening Modes" (➔ page
En-20
■
Operating on the AV receiver
LISTENING MODE
1
Use the input selector buttons to select the input
source.
2 Start playback on the source component.
3 To adjust the volume, use the MASTER VOLUME
control.
4
Select a listening mode and enjoy!
(➔ page 22)
23)
24)
30)
Turning On & Basic Operations
Input selector buttons
MASTER VOLUME