PowerTec PTi4500 Operating Instructions Manual

4500w digital inverter generator

Advertisement

Quick Links

PTi4500
Inverter Generator
ATTENTION! You must not start up this machine before you've read the operating manual,
adhered to all instructions and the machine is fully assembled according to the instructions!
4500W
DIGITAL GENERATOR

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PTi4500 and is the answer not in the manual?

Questions and answers

Summary of Contents for PowerTec PTi4500

  • Page 1 PTi4500 4500W DIGITAL GENERATOR Inverter Generator ATTENTION! You must not start up this machine before you’ve read the operating manual, adhered to all instructions and the machine is fully assembled according to the instructions!
  • Page 2: Table Of Contents

    PTi4500 4500W DIGITAL GENERATOR CONTENTS Specifications..................3 Preamble....................4 Intended use...................5 Meaning of the used symbols..............5 Safety instructions...................8 Residual risks..................11 List of components................12 Before operation...................16 Operation....................18 Maintenance..................23 Transport and storage................27 Troubleshooting..................28 Disposal....................30 Warranty....................31 Notes.....................33 www.powertec.net.nz...
  • Page 3: Description Of Symbols

    4500W DIGITAL GENERATOR Description Of Symbols Introduction Your new POWERTEC Generator will more than The rating plate on your tool may show symbols. satisfy your expectations. It has been manufactured These represent important information about the product or instructions on its use.
  • Page 4: Preamble

    If the device is used for improper use, the seller and the manufacturer dissociate themselves from any guarantees! POWERTEC is constantly working on the further development of its products and therefore reserves the right to make changes without prior notice, e.g. of shape or appearance.
  • Page 5: Intended Use

    PTi4500 4500W DIGITAL GENERATOR INTENDED USE The device is suitable for applications which are intended for operation on 230 V ~ and 12 V / 5 V DC. It generates electrical energy as part of a grid replacement operation. The generator is not designed for commercial use. It is essential that you observe the restrictions in the safety instructions.
  • Page 6 PTi4500 4500W DIGITAL GENERATOR NOTICE Risk of damaging the engine or other properties, if the NOTICE advices are not respected! ATTENTION ATTENTION Important clauses in the manual are marked with this sign! READING THE MANUAL Not obeying the operation instructions or protective measures can cause serious injuries.
  • Page 7 PTi4500 4500W DIGITAL GENERATOR GROUNDING In order to avoid electric shock, the generator should only be operated with a strong, grounded cable. DO NOT CONNECT THE GENERATOR WITH OTHER CIRCUITS. FIRE, OPEN FLAMES AND SMOKING ARE FORBIDDEN. WARNING AGAINST EXPLOSIVE SUBSTANCES.
  • Page 8: Safety Instructions

    PTi4500 4500W DIGITAL GENERATOR SAFETY INSTRUCTIONS Keep your work place tidy. • Disorder at the work place can result in accidents. • Never work with the engine device in closed or poorly ventilated rooms. • When the engine is running, toxic gases are generated.
  • Page 9 PTi4500 4500W DIGITAL GENERATOR DANGER Wearer of a cardiac pacemaker are not allowed to touch conducting parts of the ignition system with running engine. Check the power tool. • Before further use of the power tool, protective equipment or slightly damaged parts must be carefully checked for their proper and intended function.
  • Page 10: Service Security

    PTi4500 4500W DIGITAL GENERATOR • store the machine properly when not in use. Choose a safe location so that the machine cannot be started by unauthorized persons. Do not place the device unprotected outdoors or in a damp environment. • Before starting up, inspect protective equipment for its proper and intended function.
  • Page 11: Residual Risks

    PTi4500 4500W DIGITAL GENERATOR • pay attention to the safe operating condition of the machine, in particular check the fuel system and the tank cap for leaks. • make sure that the nuts and Screw are properly tightened. • replace damaged or worn machine parts with new original spare parts.
  • Page 12: List Of Components

    PTi4500 4500W DIGITAL GENERATOR LIST OF COMPONENTS 1. Manual starter 2. Frame 3. Fuel tank cap 4. Control panel 5. Oil-depth gage www.powertec.net.nz...
  • Page 13: Control Element

    PTi4500 4500W DIGITAL GENERATOR Control element 1 2 3 1. Low Oil Indicator 7. AC Overload 13. Earthing Bolt 2. Voltage Indicator 8. Engine Switch 3. Overload Indicator 9. Economy Mode Switch 4. Reset Button 10. USB Ports 5. LED Display 11.
  • Page 14: Usb Ports

    PTi4500 4500W DIGITAL GENERATOR Overload or malfunction of the consumers ATTENTION Inductive consumers require more power for start-up. So ensure that you don’t exceed the rated power with the consumer you use. Inductive loads (certain devices which are powered by an electric engine, e.g. drill can only provide c.
  • Page 15: Ac-Power-Outlets

    PTi4500 4500W DIGITAL GENERATOR CAUTION • The fuel-saving mode is not suitable for applications in which loads require • If several loads with high power requirements are connected, set the fuel-saving • If the generator runs constantly, set the fuel-saving mode selector switch (ECO •...
  • Page 16: Before Operation

    PTi4500 4500W DIGITAL GENERATOR BEFORE OPERATION Fill engine oil The generator is delivered without oil. Please pay attention to the following advices for the choice of the oil. ATTENTION Check whether the device is standing horizontally and the main switch is on.
  • Page 17 PTi4500 4500W DIGITAL GENERATOR NOTICE Regular gasoline usually has a shelf life of 3 months. WARNING • • DO NOT as well as at the storage location of the gasoline. Fill up the fuel tank only at well- • DO NOT •...
  • Page 18: Operation

    PTi4500 4500W DIGITAL GENERATOR OPERATION Make sure that no consumer is connected and the generator is leveled out. To avoid overheating, assure that the ventilation under the generator is guaranteed. 1. Turn the ECO-switch into position 'OFF'. 2. Turn the power switch into position 'ON'.
  • Page 19 PTi4500 4500W DIGITAL GENERATOR 4. Move the choke to the closed position. 5. Slightly pull the starter until you can feel a resistance, then pull hard. ATTENTION Make sure that the handle of the cable wire starter does not recoil against the generator case.
  • Page 20 PTi4500 4500W DIGITAL GENERATOR ATTENTION overheating and massive damages to the device. Areas of use WARNING In order to avoid electric shock, the generator should only be used with a strong, grounded cable. For example, you can use a commercially available earth rod for grounding.
  • Page 21 PTi4500 4500W DIGITAL GENERATOR If the device shows abnormal action, for example slowed reaction or abrupt shut generator and check whether the problem is caused by the consumer, or whether the rated power of the generator was exceeded. Overload display Use of continuous current (DC) 1.
  • Page 22 PTi4500 4500W DIGITAL GENERATOR 2. Turn the power switch to position 'OFF'. 3. Turn the fuel tap into position 'OFF'. Tank ATTENTION that the lid of the petrol tank and the petrol tap are closed and the main switch is in the 'OFF' position.
  • Page 23: Maintenance

    PTi4500 4500W DIGITAL GENERATOR MAINTENANCE ATTENTION Always disconnect the spark plug connector before maintenance work. Good maintenance of your generator ensures safe, economical and smooth operation. Air pollution is also reduced. WARNING NOTICE Use only original for replacement of defective or worn components in order to avoid damage to the generator.
  • Page 24 PTi4500 4500W DIGITAL GENERATOR Maintenance of air cleaner regularly to avoid a malfunction of the carburator. Shorter maintenance intervals are WARNING or explosion. A. Loosen the screw. D. If necessary, replace the air cleaner. www.powertec.net.nz...
  • Page 25: Spark Plug Maintenance

    PTi4500 4500W DIGITAL GENERATOR Spark plug maintenance Use only an original high-quality spark plug. To ensure smooth operation of the engine, the spark plug must be free of sediments and the electrode intervals must be adjusted correctly 0,6 - 0,7 mm 3.
  • Page 26 PTi4500 4500W DIGITAL GENERATOR www.powertec.net.nz...
  • Page 27: Transport And Storage

    PTi4500 4500W DIGITAL GENERATOR TRANSPORT AND STORAGE ATTENTION Unplug the ignition coil before transport and storage. In order to avoid gas leakage during transport and storage, please turn the power switch and the fuel cap to 'OFF' and place the generator at an elevated level.
  • Page 28: Troubleshooting

    PTi4500 4500W DIGITAL GENERATOR www.powertec.net.nz...
  • Page 29 PTi4500 4500W DIGITAL GENERATOR www.powertec.net.nz...
  • Page 30: Disposal

    PTi4500 4500W DIGITAL GENERATOR DISPOSAL Dispose the sweeper operating supplies: drain the operating supplies prior to disposal! This generator must not be disposed of with regular household waste! Dispose of the generator in the appropriate manner. For more information, consult your community waste disposal service. Items which are labelled with the adjacent symbol must not be disposed of in household waste.
  • Page 31: Warranty

    If a product is repaired under warranty, parts and labour required for the repair will be supplied at no charge. All *These Powertec Warranty periods are for products that are: defective parts replaced under warranty become property of Euroquip. Consumable items such as, but not limited •...
  • Page 32 In the event you are faced with a manufacturing fault with and tear from usage and/or damage which results from your Powertec product, you can claim a repair or part neglect of periodic maintenance. replacement under warranty if the following conditions are •...
  • Page 33: Notes

    PTi4500 4500W DIGITAL GENERATOR www.powertec.net.nz...
  • Page 34 PTi4500 4500W DIGITAL GENERATOR www.powertec.net.nz...
  • Page 35 PTi4500 4500W DIGITAL GENERATOR www.powertec.net.nz...
  • Page 36 Congratulations on your new POWERTEC product. We are proud to have you as our customer and will strive to provide you with the best service and reliability in the industry. This product is backed by our extensive warranty and service network. Please contact your local agent or submit a service...

Table of Contents