Connecting Video Components - JVC RX-D201S - AV Receiver Instructions Manual

Audio/video control receiver
Hide thumbs Also See for RX-D201S - AV Receiver:
Table of Contents

Advertisement

Connecting video components

Do not connect the AC power plug to the wall outlet until all connections are completed.
SCART connection
You can enjoy pictures and sounds from playback components
simply by connecting with the SCART cable.
• If your video components have digital output terminal, also
connect them using the digital terminals explained in "Digital
connection" (see page 10).
CAUTION:
If you connect a sound-enhancing device such as a graphic
equalizer between the source components and this receiver, the
sound output through this receiver may be distorted.
VCR
NOTES
• Select the analogue input mode. See "Selecting the analogue or
digital input mode" on page 12.
• When the TV is equipped with multiple SCART terminals, refer
to the TV manual to check the available video signals for each
terminal, then connect the SCART cable correctly.
SCART Terminal Specifications
Audio
Composite
Input
Video
S-video (Y/C)
RGB
Audio
Composite
Output
Video
S-video (Y/C)
RGB
T-V LINK
AM EXT
AV IN/OUT
TV
DVR/DVD
SCART cable
(not supplied)
Terminal name
TV
VCR
DVR/DVD
L/R
L/R
*1*2
*1*2
*1*2
*2
*2
*3
*3
*3
: Available, –: Not available
DO NOT use a TV through a VCR or a TV with a built-in
VCR; otherwise, the picture may be distorted.
Turn off all components before making connections.
• Illustrations of the input/output terminals are typical
examples. When you connect other components, refer also
to their manuals since the terminal names actually printed on
the rear vary among different components.
*1 The signals input from a SCART terminal cannot be output
through the same SCART terminal.
*2 The video format of the output video signals are consistent
with that of the input video signals. For example, if S-video
signals are input to this receiver, no signals other than S-
video signals can be output from this receiver.
Refer to the manuals supplied with the video components to
check the setting of the input/output video signals.
*3 The signals for the T-V LINK function are always going
through the receiver.
CONTINUED ON THE NEXT PAGE
TV
DVD recorder or
DVD player
VCR
7

Advertisement

Table of Contents
loading

Table of Contents