Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Silex technology Manuals
  4. Wireless Router
  5. SX-BR-4600WAN
  6. Setup manual

Silex technology SX-BR-4600WAN Setup Manual

Hide thumbs Also See for SX-BR-4600WAN:

Advertisement

Quick Links

Download this manual
Wireless Bridge SX-BR-4600WAN
Wireless Bridge SX-BR-4600WAN2
Thankyou for purchasing the Wireless BridgeSX-BR-4600WAN
product
This product is the wireless bridge which can add a wireless connection feature to non-wireless devices
with a 10/100/1000BASE-Twired LAN interface. In addition to printers with a wired LAN port, various
devices such as surveillance cameras,etc. can easily be connected to a wireless LAN. Also, wireless
security feature of this product will allow secure use of your network devices.
This Setup Guide explains how to setup and usethis product in a wireless network.
For details, refer to the user's manual.
User's Manual
can be down
Package contents
Following items are bundled with this product.
[3 Wireless Bridge SX-BR-4600WAN/ SX-BR-4600WAN2
C] Power supply
Network
cable
CJ Setup Guide (this document)
C] Warranty booklet
C] GPLlicense notice (Distribution Of source code licensed under the open source software
Parts
and
function
FRONT
O)
ush switch
Status LED (Yellow)
LAN port
Link LED (Green/Orange)
Power
connector
OWERLED (Orange)
WLAN LED (Green)
STATUS LED (Green)
Ethernet
address
Setup Guide
silex
oaded
from
our website.
Starts this product in Configuration
Pressand hold the push switch for 5 secwhile this product is active.
Configures this product using push switch:
Pressand hold the push switch for 10sec while this product is active.
Resets this product to factory default settings:
pressand hold the push switch while turning on this product. Release
the switch when the Link LEDturns to Orange and then Green.
BLINK :Waiting for connection when Link LEDis OFF.
Transferring data when Link LEDis ON.
Connects
ON(Green)
ON(Orange) : Connected to 1000BASE-Tnetwork
Connect AC adapter.
TOP
WLAN
STATUS
Turns ON when this product is powered on.
ON : Running in Infrastructure mode.
OFF : Running in Ad hoc mode.
BLINK : Processing setup using the Push switch.
* Blinkstogether with STATUS LEDwhen running in Configuration Mode.
ON
: A network
BLINK : Transferring data.
* Blinkstogether with WLANLEDwhen running in Configuration Mode.
The Ethernet (MAC)Address Ofthis product is found on the bottom.
/ SX-BR-4600WAN2 (hereinafter, " This
to the network
cable.
: Connected
to IOBASE-T/I OOBASE-TX network
connection
is established.
Jan, 2019
WA102740XA
BACK
Mode:
BOTTOM
ice nse)

Advertisement

loading
Need help?

Need help?

Do you have a question about the SX-BR-4600WAN and is the answer not in the manual?

Questions and answers

Related Manuals for Silex technology SX-BR-4600WAN

Summary of Contents for Silex technology SX-BR-4600WAN

  • Page 1 Package contents Following items are bundled with this product. [3 Wireless Bridge SX-BR-4600WAN/ SX-BR-4600WAN2 C] Power supply Network cable CJ Setup Guide (this document) C] Warranty booklet C] GPLlicense notice (Distribution Of source code licensed under the open source software...

  • Page 2: Wireless Bridge

    Configuration Method 1 - Setup Using Configuration Mode Configuration Method 1 - Setup Using Co Connect the AC adapter to this p If you are using a wireless router supporting WPS(Wi FiProtected Setup), pleasestart from Configuration Method 2 - Easy Setup Using Push Switch on the back. an electrical outlet.
  • Page 3 Step2 Setup Start aWeb browser (Internet Explorer,Safari, etc) on the PCyou are using for the setup.The Web page of this product isdisplayed. onfiguration Mode If you are using a wireless router supporting WPS(Wi FiProtected Setup), pleasestart from Configuration silex Connect the AC adapter to this product, and the ACadapter's plug to When the POWERLED(at the top) turns ON, pressand hold the push switc an electrical outlet.
  • Page 4 Wireless Bridge Electrical Outlet In the Web page, select the destination network from the Wireless Confirm Network List and enter the WEP Key Or Shared Key for the Network Wireless Bridge LED is ON Key. Click Submit when finished. Push Switch Wireless Bridge Release the push switch...
  • Page 5 enter the wireless settings of the network that you wish to connect this Step3 Connect to the network device you wish to use wirelessly product to, and click the Submit button. Referto the HELPfor details on Turn off the network device that you wish to use wirelessly via thi each setting.
  • Page 6 Once a message appears indicating that the configuration has been completed, close the Web browser. Connect the AC adapter to this product and the AC adapter's plug to the electrical Outlet. Em-r- Ectop Electrical Outlet Will nun h Wireless Bridge The configuration has now been completed.
  • Page 7 Configuration Method 2 - Easy Setup Using Push Switch Configuration Method 2 - Easy Setup Using Push Swit This product allows you to configure its wireless settings easily using a push switch if your wireless router supports WPS(Wi-Fi Protected Setup). This product allows you to configure its wireless settings easily using a push switch if your wireless router supports WPS(Wi-Fi Protected Setup).
  • Page 8 Turn on the network device connected to this product. Printer Electrical Outlet * Some network devices may require additional network settings. In such cases,refer to the manual that came with the network device. ode can be configured only when this product is running in Configuration Mode.
  • Page 9 Pressand hold the push switch (at the front). The WLAN LEDand STATUS LEDwill start to blink together. Releasethe push switch when the STATUS LEDturns off while the WLAN LEDkeeps blinking (it maytake 15secfor the STATUS LEDto turn off after both LEDsstarted blinking). Press the WPSbutton on your wireless router.
  • Page 10 ogether. Initialize System Configuration maytake 15secfor the STATUS LEDto turn off after both LEDsstarted blinking). Initialize the system information configured to this product and reset it to the factory default settings. WLAN Disconnect the ACplug of this product from the electrical outlet. Confirm STATUS this...
  • Page 11 When Link LEDon a LAN port turns to Orange and then Green, the factory default configuration is complete. Releasethe push switch. Orange Green Whenwirelessconfigurationhasfailed,theWLANLEDwill flash rapidly. Read the notes above and start from 4 again. Push Switch Wireless Bridge ment (up to 2 min). Release the push switch Trademarks Wi Fi Protected Setup (WPS) is trademarks or registered trademarks of Wi Fi Alliance.

This manual is also suitable for:

Sx-br-4600wan2