• Read the operating manual carefully. • Keep the operating manual and pass it on to other users when needed. CHERRY MX 3.0S Wireless is a tri-mode keyboard for operating PCs / laptops and has been developed especially for gaming.
PC or laptop. The previous connection information on this channel is deleted. 6 Select your MX 3.0S Wireless Keyboard on your device to establish the connection within 30 seconds. The Bluetooth LED ( ) lights up blue to confirm that the keyboard has been connected.
Page 5
Bluetooth channel. 6 Installing the CHERRY Gaming Software To use the CHERRY MX 3.0S Wireless keyboard to its full potential, you need to install the CHERRY Gaming Software on your PC or laptop. With the CHERRY...
Page 6
Additional Functions). You can further adjust the backlighting effects with the CHERRY Gaming Software. To do so, you need to install the software (refer to: 6 Installing the CHERRY Gaming Software). When the software is installed, you can press the CHERRY key ( ) to launch the application (refer to: 6.1 Running the CHERRY Gaming Software).
Page 7
When it is disabled, the LED on the CHERRY key lights up red. Press (FN + ) again to enable the CHERRY key. 10 Charging the Keyboard When the keyboard battery is low, the "USB / Battery" LED ( ) above the arrow keys flashes red.
Page 8
• Use a USB extension cable to place the receiver as close to the keyboard as possible. • Use the CHERRY Gaming Software to re-pair the receiver with the keyboard. 14 Mounting the Support Legs 1 Pull the rubber feet out from the rear drill threaded holes on the bottom of the keyboard.
Page 9
Internet: www.cherry-world.com atau www.cherry-world.id RECEIVER LABEL MANUEL D’UTILISATION ① Lancer le logiciel CHERRY Gaming. Pour programmer le clavier avec le logiciel Gaming, vous devez d'abord le brancher avec le câble USB. ② Désactiver / Réactiver le son ③ Réduire le volume sonore ④...
Need help?
Do you have a question about the MX 3.0S Wireless and is the answer not in the manual?
Questions and answers