• Keep the operating manual and pass it on to other users when needed. CHERRY MX 8.2 TKL Wireless is a tri-mode (Corded USB + Bluetooth 5.2 + 2.4GHz Wireless) keyboard for operating PCs / laptops and has been developed especially for gaming.
PC or laptop. The previous connection information on this channel is deleted. 6 Select your MX 8.2 TKL Wireless Keyboard on your device to establish the connection within 30 seconds. The Bluetooth LED ( ) lights up red to confirm that the keyboard has been connected.
Page 5
Bluetooth channel. 6 Installing the CHERRY Gaming Software To use the CHERRY MX 8.2 TKL Wireless keyboard to its full potential, you need to install the CHERRY Gaming Software on your PC or laptop. With the...
CHERRY Gaming Software. To do so, you need to install the software (refer to: 6 Installing the CHERRY Gaming Software). When the software is installed, you can use the CHERRY key combination to launch the application (refer to: 6.1 Running the CHERRY Gaming Software).
The "USB / Battery" LED ( ) lights up blue while the keyboard is charging. The LED goes out when the keyboard is fully charged. The charging circuit prevents overcharging. The keyboard battery is charged as long as the PC / laptop is switched on.
• Use a USB extension cable to place the receiver as close to the keyboard as possible. • Use the CHERRY Gaming Software to re-pair the receiver with the keyboard. 13 Disposing of Devices •...
Great Hucklow SK17 8RG RECEIVER LABEL MANUEL D’UTILISATION ① Lancer le logiciel CHERRY Gaming. Pour programmer le clavier avec le logiciel Gaming, vous devez d'abord le brancher avec le câble USB. ② Désactiver / Réactiver le son ③ Réduire le volume sonore ④...
Need help?
Do you have a question about the MX 8.2 TKL Wireless and is the answer not in the manual?
Questions and answers