Table of Contents
Advertisement
Quick Links
EX11000
Quick Setup
IMPORTANT: Before using the projector, make sure you read these instructions
and the safety instructions in the online User's Guide.
Connect the projector
Computer
Choose from the following connections. See the sections below or the online
User's Guide for details.
HDMI cable
VGA cable
USB cable
HDMI port
Connect one end of an HDMI cable to one of the projector's HDMI ports and
the other end to an HDMI port on your computer.
Computer port
Connect one end of a VGA cable to one of the projector's Computer ports, and
the other end to your computer's
monitor port. If you are using a laptop,
switch it to external display (see "Troubleshooting"). You can also connect an
audio cable.
Note: To use the projector's Computer2 port, change the Monitor Out Port
setting in the Signal I/O menu. See the online User's Guide for details.
USB port
Connect the square end of a USB cable to the projector's USB-B (square) port.
Connect the flat end of the cable to any USB port on your computer.
Windows
7 or later: After turning on the projector, follow the on-screen
®
instructions to install the Epson
USB Display software (EMP_UDSE.EXE; only
®
on first connection). If the software screen does not display automatically, open
My Computer, Computer, or This PC, then double-click EPSON_PJ_UD.
OS X 10.8.x or higher: After turning on the projector, the setup folder for
USB Display appears in the Finder. Double-click USB Display Installer and
follow the on-screen instructions to install the Epson USB Display software
(only on first connection). If the software screen does not display automatically,
double-click EPSON_PJ_UD, then double-click USB Display Installer.
Screen mirroring
You can use Miracast
to send images to your projector from supported
®
smartphones, tablets, and laptops. See the online User's Guide for details.
External monitor and speakers
You can connect an external monitor and external speakers to your projector to
enhance your presentations. See the online User's Guide for details.
Wired network
Connect the projector to your network using an Ethernet cable. See "Wired
network configuration" for more information.
Ethernet cable
Advertisement
Table of Contents
Related Manuals for Epson EX11000
Summary of Contents for Epson EX11000
- Page 1 OS X 10.8.x or higher: After turning on the projector, the setup folder for USB Display appears in the Finder. Double-click USB Display Installer and follow the on-screen instructions to install the Epson USB Display software (only on first connection). If the software screen does not display automatically, double-click EPSON_PJ_UD, then double-click USB Display Installer.
-
Page 2: Using The Remote Control
Note: If you are connecting a streaming device, you can also connect it to the projector’s USB-A (flat) port for power. Camera, USB device, or document camera Connect a digital camera, USB flash drive, USB storage device, or Epson DC-07 document camera to the projector’s USB-A (flat) port. USB cable If you connect a digital camera, USB flash drive, or USB storage device, you can use the projector’s PC Free feature. -
Page 3: Adjust The Image
Open the projector’s lens cover. Press the power button on the projector or remote control. The projector beeps, and the Status light flashes blue and then stays on. Note: To shut down the projector, press the power button twice. Follow the on-screen instructions to set up your projector. If you see a screen displaying 123, select the upright option and press on the remote control to continue. -
Page 4: Wireless Network Configuration
Your projector automatically adjusts an image that looks like but if necessary you can press the button on the projector to correct it. Wireless network configuration Follow these steps to set up the projector for a wireless network connection. Press the Menu button on the remote control. Select the Management menu and press Select On as the Wireless LAN Power setting. -
Page 5: Project Over A Network
Ver.X.XX. Windows 10: Select > EPSON Projector > Epson iProjection Ver.X.XX. Windows 8.x: Navigate to the Apps screen and select Epson iProjection Ver. X.XX. Windows 7: Select or Start > Programs or All Programs > EPSON Projector > Epson iProjection > Epson iProjection Ver X.XX. -
Page 6: Using Web Remote
Open your web browser and enter the IP address of the projector you want to monitor in the browser’s address bar. The Epson Web Control menu opens. -
Page 7: Troubleshooting
(U.S. sales) or http://epsonstore.ca (Canadian sales). (Canadian sales). EPSON is a registered trademark, Epson iProjection is a trademark, and EPSON Exceed Your Vision is a registered logomark of Seiko Epson Corporation. PrivateLine is a registered trademark of Epson America, Inc.
Need help?
Do you have a question about the EX11000 and is the answer not in the manual?
Questions and answers